Polykar Super Plus Fine Two-Component Polyester Filler, 2 kg

Fine filler for filling small unevennesses, grooves, and pores. Intended for common substrates including cast iron, aluminum, zinc, and fiberglass. Usable also for leveling unevenness in wood (harder types), laminate, concrete, etc. Due to its fine structure, it is very easy to apply. Suitable for model makers.

The filler should not be used for filling places that come into direct contact with food and drinking water.

Application:
The surface must be free of rust and sanded with P80 sandpaper. The surface must be clean, dry, dust-free, and grease-free. For maximum corrosion protection, first use an epoxy or polyurethane base. Do not apply the filler on reactive, single-component, and nitrocellulose bases. It is applied with a spatula.

Hardening:
The filler hardens with hardener (PE initiator, dibenzoyl peroxide, red paste in a tube) in a weight ratio of 100:2 - 100 parts of filler : 2 parts of hardener – recommended ratio for a temperature of 23°C.

Processing time:
The filler must be processed at a temperature of 23 °C and a hardening ratio of 100:2 within 5 minutes after mixing with the hardener. At temperatures lower than 23 °C (at least 17 °C), the processing time is extended; at higher temperatures, it is shortened. By adjusting the hardening ratio, the influence of temperature on the processing time can be partially eliminated.

Hardening ratio:
- at least 100:1 – extends the processing time
- at most 100:3 – shortens the processing time

Sanding:
The filler is sandable at a temperature of 23 °C and a hardening ratio of 100:2 in 20-30 minutes. Coarse sanding starts with P80-120 sandpaper and is finished with 180-240 paper. It is recommended to use a rotary or vibrating sander for sanding.

Top coat:
All common coating systems can be used on the filler. The filler withstands temperatures of 80 - 110 °C.

Cleaning:
Dirty parts of tools can be cleaned with POLYKAR POLYESTER THINNER or nitro thinner C6000. Only uncured filler can be cleaned.

Product safety warnings (H-statements)

• EUH212: Warning! Harmful respirable dust may be produced during use. Do not inhale dust
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H361d: Suspected of damaging the unborn child through inhalation.
• H372: Causes damage to organs with prolonged or repeated exposure.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P270: Do not eat, drink or smoke when using this product.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.