Uniflex PES-TMEL UNI universal filler, 200 g

Uniflex filler uni is a two-component universal polyester filler designed for filling large and small irregularities. It is primarily used on metal, steel, stone, concrete, and wood. The Uni filler is paintable, suitable for indoor and outdoor use. Metallic substrates that are prone to corrosion need to be treated with an anti-corrosive primer, especially outdoors. The filler is gray with a red hardener. The filler should not be used for filling areas that come into direct contact with food and drinking water.

Characteristics of the universal filler:

• Two-component universal polyester filler
• Designed for filling medium and large irregularities
• Excellent adhesion to most surfaces, especially metal, steel, stone, concrete, wood, etc.
• Suitable for repairing damaged substrates
• High filling capacity
• Easy to process and sand
• Paintable
• For indoor and outdoor use
• Viscosity at 20 °C is paste-like
• VOC content: 2004/42/IIB (b) (250) < 250g/l
• Gray shade

Processing of the universal filler:

Substrate for filler:
The substrate must be clean, dry, solid, and free from rust, grease, and dirt. Original coatings should be sanded down to the substrate. Metallic substrates should be treated with a primer with anti-corrosive properties – especially important outdoors.

Hardening of the filler:
The filler hardens with the hardener in a weight ratio of 100 parts of filler : 2 parts of hardener. Excessive addition of hardener is undesirable and can lead to blooming and changes in the color shade in the subsequent topcoat.

Processing time of the filler:
3 – 4 minutes at + 20 °C. The reaction temperature must not drop below +5 °C.

Application of the filler:
by smoothing.

Drying and sandability time of the filler:
at + 20°C approximately after 15 minutes against dust, sandable after 25 minutes.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H361d: Suspected of damaging the unborn child through inhalation.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours)
• P501: Dispose of contents/container in accordance with the instructions on the product.