Uniflex whipped filler, 250 ml

Whipped super lightweight filler that often replaces plaster. Suitable for interior use. It is paintable, does not drip, does not crack, and does not shrink. It smooths out very well and is sandable. It withstands water exposure and has very good adhesion to the substrate. It permanently fills hairline and larger gaps.

Usage:
Plaster, drywall, masonry, wood, stucco, ideal for repairing cracks in panel walls and ceilings.

Properties of Uniflex whipped filler:

• Color white.
• Appearance paste.
• Toxicity non-toxic.
• Solubility before curing - easily soluble in water.
• Solubility after curing - practically insoluble in water.
• Temperature resistance after curing +5 to + 50 °C.
• Specific gravity 0.55 + 0.05 g/cm³.
• Workability +5 to +35 °C.

Application of Uniflex whipped filler:

• The surface must be clean, free of dust and grease,
• when applying on absorbent material, lightly dampen the crack,
• using a spatula, apply the filler into the hole or crack and smooth it out,
• the repaired surface can be painted with water-based paints after 2 hours, with any paint after 24 hours,
• clean tools after use with lukewarm water.

Warning:

If inhaled - Move the affected person to fresh air and ensure physical and mental calm. Prevent hypothermia. If irritation persists, seek medical attention/treatment. In case of skin contact - Remove contaminated clothing from the body, wash affected skin with water and soap, and if necessary, treat with a restorative cream. If problems persist, seek medical attention/treatment. If the eyes are affected - Rinse the affected eye gently with plenty of clean water for several minutes, remove contact lenses, if worn and easy to remove, continue rinsing. If irritation of the eye persists, seek medical attention/treatment. If swallowed - Thoroughly rinse mouth with plenty of water; in cases of ingestion of a larger amount and/or in cases of uncertainty or problems, seek medical attention/treatment. Provider’s own protection No measures are required.