Profile mounting foam, tubular, 750 ml

Single-component expanding polyurethane foam ready for immediate use with a tubular applicator. It has excellent adhesion to most construction materials and outstanding thermal and acoustic insulating properties. During curing, it expands and perfectly fills gaps and cavities.

Contains propellant that does not harm the ozone layer. Designed for installing and sealing window and door frames, filling construction gaps and cavities, securing roofing elements, filling gaps in thermal insulation materials, etc.

Instructions for use:
The substrate must be clean, free from dust and grease. It is recommended to moisten the substrate and also the surface of the foam after application. Shake the foam bottle thoroughly (min. 30x), screw on the applicator tube, and apply the foam by pressing it while in an upside-down position. Fill vertical gaps from the bottom up, dosing about 1/3 of the total volume of the gap. Cut off excess foam after curing. Application temperature +5°C to +35°C. Clean uncured foam with PU foam cleaner or acetone, cured foam mechanically. Protect the surface of the foam from UV radiation.

Product safety warnings (H-statements)

• H222: Extremely flammable aerosol.
• H229: Container is under pressure: may burst when heated.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• H335: May cause respiratory irritation.
• H351: Suspected of causing cancer.
• H362: May harm breastfeeding infants through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H413: May cause long-lasting harmful effects to aquatic life.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.