Soudal 66A polyurethane wood glue, 250 g

Soudal 66A polyurethane wood glue, characterized by a short drying time, very high adhesive strength, and the highest water resistance class D4 (ČSN EN 204). It has filling capabilities - it foams, exhibiting high adhesive strength. Can be used on damp wood. By applying load or compression in clamps, we increase the final strength of the bond.

Characteristics of Soudal 66A PU wood glue:

• Easy application,
• professional quality,
• fast-drying,
• filling capabilities – it foams during curing,
• high adhesive strength,
• water resistance D4 (ČSN EN 204),
• can be used on damp wood.

Examples of using Soudal PU wood glue:

• Interior applications with frequent short-term exposure to flowing water or condensed water on the glue,
• exterior applications exposed to weather conditions,
• manufacturing window and door frames, where such exposure to humidity (exterior) is expected that they must be constructed to water resistance class D4 according to EN 204,
• gluing wooden parts.

Technical data of PU wood glue:

• Base Polyurethane.
• Consistency liquid.
• Curing system moisture-based.
• Open time (*) 15 min.
• Compression time at least 3 hours.
• Compression strength about 1 kg/cm².
• Specific weight (DIN 53479) 1.1 g/ml.
• Water resistance (DIN EN 204) D4.
• Temperature resistance -30°C to +100°C.
• Shear strength > 10 N/mm².
• Solid content 95%.
• Consumption in surface application about 150 ml/m².

Suitable surfaces:

Substrates: various types of porous and non-porous materials, such as wood, concrete, bricks, and other building materials. Not suitable for PE and PP. Surface condition: clean, free from grease and dust. Surface preparation: the curing of the glue is influenced by the action of atmospheric moisture, slight moistening of the bonded surfaces increases the curing speed and promotes the foaming of the glue, thus enhancing its filling capabilities when gluing porous materials and not completely smooth surfaces. We always recommend conducting a preliminary compatibility test.

Working procedure:

Application: using a brush or fine toothed spatula, apply a thin layer of glue on one of the bonded parts. Within 15 minutes, join the bonded parts and keep them compressed for 3 hours. Compressing the glued parts during curing is essential to achieve the final strength of the bond. Working temperature: +5 °C to +35 °C. Cleaning: uncured glue can be cleaned with PU foam cleaner or acetone, cured glue can only be removed mechanically. Repairs: PU wood glue 66A.

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• H335: May cause respiratory irritation.
• H351: Suspected of causing cancer.
• H373: May cause damage to organs through prolonged or repeated exposure.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P284: In case of inadequate ventilation, wear respiratory protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P501: Dispose of contents/container to the instructions on the product.