Soudal mounting foam, expanding, tube, 750 ml

Soudal mounting PUR foam single-component expanding mounting foam ready for immediate use via a tube applicator. Made from high-quality raw materials, suitable for professional use. It has excellent adhesion to most materials, outstanding filling properties, and heat and sound insulating qualities. Contains a propellant that does not harm the environment.

Characteristics of Soudal mounting PUR foam:

• Excellent adhesion to most materials (except PTFE, PE, and PP),
• excellent thermal and sound insulation properties,
• very good filling properties,
• excellent mounting properties,
• excellent stability (does not shrink, no risk of later expansion).

Application of Soudal mounting PUR foam:

• Installation of window and door frames,
• filling cavities,
• sealing and filling openings in roof construction,
• creating a sound insulating layer,
• installation and sealing of window and door frames,
• joining insulation materials and roof construction,
• applying sound insulating layer in engine compartments,
• improving thermal insulation properties of cooling systems.

Technical data of Soudal mounting PUR foam:

• Base polyurethane (PUR foam).
• Consistency stable foam mass.
• Curing system moisture, thixotropic.
• Skin formation approx. 8 min. (20 °C/65 % r.h.).
• Surface drying speed non-sticky after 20-25 min at 20 °C.
• Curing speed layer 3 cm 1.5 hours (20 °C, 65 % r.h.).
• Yield 1000 ml = approx. 45 liters of foam (in free space).
• Structure of foam 70-80 % closed cells.
• Specific weight 25 kg/m³ (after curing).
• Temperature resistance -40 °C to +90 °C (after curing).
• Color yellowish white.
• Fire resistance class (DIN 4102 part 2) B3.
• Insulation factor 33 mW/m.K.
• Shear strength (DIN 53427) >17 N/cm².
• Compressive strength (DIN 53421) >3 N/cm².
• Bending strength (DIN 53423) >7 N/cm².
• Water absorption (DIN 53429) 1 % vol.

Application procedure:

Before application, shake the aerosol can thoroughly - at least 30 times. Moisten the substrate before application with water, preferably using a spray bottle. Foam the joints and gaps from 50% considering the subsequent expansion of the foam. Apply the contents of the can with the valve facing down. During application, occasionally shake the foam again. Apply the foam from the bottom upwards. The space being filled should not be thicker than 50 to 100mm for a single layer of fresh foam. If filling larger cavities, work gradually and always re-moisten individual layers of the applied foam with a spray bottle.

Cleaning:

Before curing, the foam can be removed with SOUDAL PU foam cleaner or acetone. After curing, mechanically and with SOUDAL cured foam remover.

Working temperature:

+5 °C to +35 °C (recommendation: +20°C to +25°C). In cold periods, it is recommended to temper the foam contents to at least 15°C before use (for example, by immersing in a warm bath).

Product safety warnings (H-statements)

• H222: Extremely flammable aerosol.
• H229: Container under pressure: may burst if heated.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• H335: May cause respiratory irritation.
• H351: Suspected of causing cancer.
• H362: May harm breastfeeding infants through breast milk.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H413: May cause long-lasting harmful effects to aquatic life.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P405: Store locked up.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.