
Soudal 60A is a construction polyurethane adhesive for wood designed for bonding furniture, wooden parts, and structural wood elements, as well as for bonding a wide range of other materials such as bricks, concrete, metals, rubber, foams, and polystyrene. It is also suitable for making laminated panels or manufacturing door and window frames. This is a non-drip construction polyurethane adhesive for wood characterized by an exceptional adhesive strength of 100 kg/cm². Once cured, the wood adhesive is transparent and permanently water-resistant according to class D4 (ČSN EN 204). The product does not leave stains and can be applied to slightly damp surfaces. It is also suitable for bonding surfaces that are not completely flat, as it slightly foams during curing. It offers fast drying, good filling capability due to foaming, high adhesive strength, and excellent water resistance.
Clear water-resistant polyurethane adhesive for wood with exceptionally high joint strength of up to 100 kg/cm². During curing, it slightly foams, reliably filling irregularities in the substrate. It does not drip during application, creates an invisible joint, and is suitable for professional use.
Substrates:
Suitable substrates: various absorbent and non-absorbent materials, such as wood, bricks, concrete, etc., unsuitable for PE and PP. Condition of the substrate: clean, free of dust and grease. Surface preparation: moistening substrates increases the speed of curing and improves filling capacity due to the foaming of the adhesive. It is always recommended to carry out a test of adhesion and compatibility (mutual tolerance of materials).
Working procedure:
Application: Apply in spots or strips with a manual or pneumatic applicator gun. No later than 15 minutes, connect the glued parts and keep them compressed for about 3 hours. Compression of the glued materials during curing is necessary to achieve maximum joint strength. Working temperature: +5 °C to +35 °C. Cleaning: White Spirit (paint thinner) or acetone before the adhesive cures. Cured adhesive can only be cleaned mechanically. Repairs: Construction Adhesive 60A.
| Species: | ostatní |
| High health hazard: | High health hazard |
Vysoká nebezpečnost pro zdraví
Nebezpečí
Při požití a vniknutí do dýchacích cest může způsobit smrt. Způsobuje poškození orgánů. Může způsobit poškození orgánů. Může poškodit reprodukční schopnost nebo plod v těle matky. Podezření na poškození reprodukční schopnosti nebo plodu v těle matky. Může vyvolat rakovinu. Podezření na vyvolání rakoviny. Může vyvolat genetické poškození. Podezření na genetické poškození. Při vdechování může vyvolat příznaky alergie nebo astmatu nebo dýchací potíže.
Varování. Pokyny pro bezpečné zacházení
Při požití: okamžitě volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO nebo lékaře. NEVYVOLÁVEJTE zvracení. Skladujte uzamčené. Nevdechujte prach/dým/plyn/mlhu/páry/aerosoly. Po manipulaci se důkladně umyjte. Při používání tohoto výrobku nejezte, nepijte ani nekuřte. Necítíte-li se dobře, vyhledejte lékařskou pomoc/ošetření . Při expozici: Volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO nebo lékaře. Před použitím si obstarejte speciální instrukce. Nepoužívejte, dokud jste si nepřečetli všechny bezpečnostní pokyny a neporozuměli jim. Používejte požadované osobní ochranné prostředky. Při expozici nebo podezření na ni: Vyhledejte lékařskou pomoc/ošetření. Zamezte vdechování prachu/dýmu/plynu/mlhy/par/aerosolů. V případě nedostatečného větrání používejte vybavení pro ochranu dýchacích cest. Při vdechnutí: Při obtížném dýchání přeneste postiženého na čerstvý vzduch a ponechte jej v klidu v poloze usnadňující dýchání. Uchovávejte mimo dosah dětí.