Soudal acrylic sealant, paintable, white, 300 ml

Paintable sealant based on acrylic for sealing and caulking joints and cracks in plaster, corner joints of walls and ceilings, joints around window and door frames, stairs, floor and other decorative moldings, etc. Once cured, it is paintable with standard paints. The sealant is also suitable for sealing joints and cracks in drywall, connection joints of window frames and door frames indoors, sealing joints between walls and interior window sills, and joints between decorative moldings and walls.

Key features of Soudal acrylic sealant paintable white:

• very easy to use
• colorfast, moisture-resistant after curing
• very good adhesion to porous materials and aluminum
• paintable after curing
• shrinkage approx. 15%

Examples of use for paintable acrylic sealant white:

• jointing of wall elements
• connection joints in the construction industry
• sealing joints and cracks in drywall
• connection joints of window frames and door frames indoors
• sealing joints between walls and interior window sills
• joints between decorative moldings and walls

Substrates for sealant:

Suitable surfaces: all porous construction materials (except PE and PP). Surface condition: clean, dry, free from dust and grease. Preparation: very absorbent surfaces should be pre-treated with diluted sealant (1 part Acrylic sealant to 2 parts water). It is recommended to always conduct a preliminary adhesion test.

Working procedure:
Application: Apply the sealant using a mechanical or pneumatic caulking gun. Application temperature: +5 °C to +30 °C, do not work if rain or frost is expected during the time needed for the sealant to fully cure. Cleaning: Uncured Acrylic sealant can be cleaned with water, once cured it can only be removed mechanically. Smoothing the surface: Smooth the surface with a smoothing tool and soapy water. Repairs: Acrylic sealant

Warning:
Do not use in areas where permanent moisture is likely. Do not apply if rain or frost is imminent. Acrylic sealant can be painted over with most available paints. The coatings used should be chosen with regard to the repaintability of flexible-plastic sealants and should be sufficiently flexible. It is recommended to always perform a compatibility test of the paint and the sealant.