Jubin Akrilin dispersive acrylic putty for wood, beech, 750 g

Jubin Akrilin is a dispersive acrylic putty designed for high-quality repairs of surface defects (cracks, scratches, depressions, and grooves) in solid wood, veneered or non-veneered particle boards, etc. before their final surface treatment. It meets the requirements of EN 71-3.

It is easy to apply, has good adhesion to the substrate, and dries quickly. Due to its exceptionally low content of hazardous substances, it is also suitable for decorative finishes on children's toys.

Substrate preparation
The substrate must be solid, dry, and clean, without loose particles, dust, grease, and other impurities. The moisture content of the wood must not exceed 12% (broadleaf) or 15% (coniferous). Resinous surfaces of the wood should be cleaned with nitro thinner or other thinners and allowed to dry well.

Preparation and application of the putty
AKRILIN is ready for immediate use. Apply it with a stainless steel spatula to fill all cracks, depressions, grooves, scratches, joints, and other defects and damages. Shallow defects are repaired with one layer of putty, while for deeper gaps and depressions, apply the putty in multiple layers so that the thickness of each layer does not exceed 1 mm. Each subsequent
layer is applied only when the previous layer is completely dry. The dry puttied surface can then be sanded mechanically or manually with fine sandpaper.

Applying the leveling compound is only possible under suitable weather or microclimatic conditions: the air temperature and wall substrate must be between +5 and +35°C, and the relative humidity of the air must not exceed 80%. When working outdoors, protect the treated surface from direct sunlight and wind during application and curing of the compound, but even on protected surfaces, these works must not be performed in rain, fog, or strong wind (>30 km/h).