Jubin Akrilin dispersive acrylic filler for wood, spruce, 750 g

Jubin Akrilin is a dispersive acrylic filler designed for high-quality repairs of surface defects (cracks, scratches, depressions, and grooves) in solid wood, veneered or non-veneered particleboard, etc. before their final surface treatment. It meets the requirements of EN 71-3.

It is easy to apply, has good adhesion to the substrate, and dries quickly. Due to its extremely low content of hazardous substances, it is also suitable for decorative modifications of children's toys.

Substrate preparation
The substrate must be solid, dry, and clean, free of loose particles, dust, grease, and other impurities. The moisture content of the wood must not exceed 12% (hardwood) or 15% (softwood). Resinous surfaces of the wood should be cleaned with nitro thinner or another solvent and allowed to dry thoroughly.

Preparation and application of the filler
AKRILIN is ready for immediate use. It is applied with a stainless steel spatula to fill all cracks, depressions, grooves, scratches, joints, and other defects and damages. Shallow defects are repaired with one layer of filler, while deeper gaps and depressions are filled with multiple layers so that the thickness of each layer does not exceed 1 mm. Each additional
layer is applied only when the previous layer is completely dry. The dry filled surface is then sanded manually or mechanically with fine sandpaper.

Applying the leveling compound is possible only under suitable weather or microclimatic conditions: the air temperature and wall substrate must be between +5 and +35°C, and the relative humidity must not exceed 80%. When working outdoors, protect the treated surface from direct sunlight and wind during application and curing, and even on protected areas, we must not perform these works during rain, fog, and strong winds (>30 km/h).