The JUPOL Citro interior paint is made on the basis of water-dispersed polymer binders. It serves mainly for decorative protection of ceilings and walls in rooms with high relative humidity, where there is a frequent risk of condensation and subsequent mold growth behind furniture, in corners, etc. It is particularly suitable for kitchens, bathrooms, laundry rooms, pantries, and similar areas in residential and commercial buildings, schools, kindergartens, hotels, hospitals, nursing homes, and other public and industrial facilities, where washability (resistance to wet abrasion) is not required.
Suitable substrates include various types of plaster, surfaces leveled with leveling compounds, textured paper wallpapers, as well as drywall and fiber cement boards, particle boards, unplastered concrete, and similar materials. The paint can also be applied to older cohesive dispersion coatings or firmly adhering decorative plasters of various kinds.
The JUPOL Citro coating features very low volatile organic compound content and is completely free of heavy metals. When applied or during drying, it emits a pleasant citrus scent. The paint is easy to apply and is available in a wide range of pastel shades. Areas frequently exposed to moisture from condensation remain protected for a long time against common types of mold after application. This protection can be further enhanced by adding 5 to 7.5% (50 to 75 ml/l) of JUBOCID. The resulting paint film is characterized by high vapor permeability and resistance to dry abrasion (when wiped with a wet cloth or sponge, it softens and gets damaged!).
170 - 200 ml/m² in two coats, depending on the roughness and absorbency of the substrate.
white (shade 1001), matte
The substrate surface must be solid, dry, and clean – free of dust, loose particles, grease, residue from form oils, and all other impurities.
Fresh plasters and leveling layers should be allowed to dry or mature for at least 1 day for each mm of thickness under standard conditions (T = +20 ºC, relative humidity = 65%), while concrete substrates require a drying time of at least one month. All coatings or sprays on previously painted surfaces that delaminate when wet must be removed,
including oil paints, varnishes, and enamels. Surfaces affected by mold must be disinfected before painting.
Prior to the initial application of the paint, a primer coat is mandatory. It is recommended to use AKRYL Emulsion, diluted with water according to the instructions for use, for problematical or lower-quality substrates (lesser quality drywall, gypsum plasters, fiber cement boards, lime plasters, and leveling compounds, fiber cement boards, particle boards, and unplastered concrete surfaces, etc.) then JUKOL Primer, diluted with water according to its usage instructions. The primer coat is applied with a masonry or paint brush, roller with long fibers, or by spraying. Under normal conditions (T = +20 ºC, relative humidity = 65%), painting can begin 6 hours (AKRYL Emulsion) or 12 hours (JUKOL Primer) after applying the primer coat.
Before use, the paint should be thoroughly mixed, and if necessary, it can be diluted with water (max. 10%) to the desired consistency suitable for the application technique and conditions. WARNING! Dilution significantly reduces the opacity of the paint! The paint needed for coating a cohesive surface (or preferably all surfaces being painted in the same shade) must be equalized (mixed together) in a container of appropriate size. For large areas where this is technically not possible to prepare paint for even one coat, first mix the paint in a equalizing container from at least three buckets.
Once one-third of the prepared paint is used, additional paint should be added to the container, and it must be thoroughly mixed with the remaining material, and so on. It is not necessary to mix (equalize) undiluted white paint of the same production batch. Any "adjustments" to the paint during application (e.g., dilution or adding tinting agents) are not allowed. The necessary amount of paint for painting each area is calculated or estimated from their area size and data on average consumption, and if needed, consumption can be verified by applying it to a sufficiently large test area.
The paint is applied in two coats with a time interval of 4 – 6 hours (T = +20 ºC, relative humidity = 65 %) using a roller with long fibers (fiber length 18 to 20 mm; either artificial or natural fiber or fabric made from various synthetic fibers – polyamide, dralon, vestan, nylon, perlon, or polyester), a brush suitable for applying dispersion paints, or by spraying. When working with a roller, a suitable drip tray is used.
Individual cohesive areas are painted smoothly and uninterruptedly from one edge to the other. Areas that are inaccessible for a standard long-fiber roller or spray gun (corners, edges, grooves, narrow reveals, etc.) are painted in each coat beforehand using a suitable brush or a smaller roller adapted to the given conditions. Painting is only possible under suitable microclimatic conditions; air and substrate temperatures must be between +5 and +35 °C, and relative humidity must be no more than 80 %.
| Species: | ostatní |