Eternal In Stop stain-blocking painter's paint, 1 kg

ETERNAL IN stop is used for priming, which can prevent the penetration of nicotine stains in heavily smoked rooms into new paint. Furthermore, this coating can isolate stains from old roller paintings, stains from leaks, rust, grease, soot, stains coming from wood, chipboard, and drywall when painting with dispersion paints, etc. ETERNAL IN stop is a single-component water-based coating material prepared based on a special water dispersion of acrylic copolymers, pigments, fillers, and special additives. ETERNAL IN stop is characterized by its ability to prevent the penetration of coloring substances from the substrate to the surface

Area of application:
ETERNAL IN stop is intended for priming that prevents the penetration of nicotine stains in heavily smoked rooms from the substrate to new paint. This coating can also isolate stains from old roller paintings, stains from leaks, stains coming from wood, chipboard, and drywall when painting with dispersion paints, etc.

Application:
ETERNAL IN stop is applied to a dry, degreased, clean, and cohesive surface in 1–2 layers. A technological break of 6 hours is necessary between individual coats. ETERNAL IN stop must be diluted with 5–10 wt. % water and well mixed before use. Only after 4 hours, when the coating has dried, can it be repainted with the internal paint ETERNAL IN, ETERNAL IN plus, ETERNAL matte acrylic coating, or other dispersion coatings or traditional interior paints.

Consumption:
0.20 – 0.30 kg/m² (1–2 layers depending on the absorbency of the substrate)

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH210: Safety data sheet available upon request.
• EUH211: Warning! Dangerous respirable droplets may be formed during spraying.Do not inhale aerosols ormist.