Eternal mat Revital color for renewing old coatings, RAL 7035 light gray, 700 g

ETERNAL mat Revital is a universal silk-matt water-based coating material for both indoor and outdoor use, prepared from a special cross-linkable dispersion of acrylic copolymers, pigments, fillers, and additives. It forms relatively hard, elastic matte coatings with high weather resistance and excellent blocking resistance even at higher temperatures. It features very good coverage, good spreading, quick drying, and excellent adhesion even to old synthetic and oil-based coatings. ETERNAL mat Revital meets the requirements of ČSN EN 71 part 3 Safety of toys Migration of certain elements.

Area of application:
ETERNAL mat Revital is intended for indoor and outdoor coatings of wood, fiberboard, chipboard, cement-bonded particle boards, drywall, unwalkable concrete, metal substrates coated with anti-corrosion paint, and certain types of plastics (tough PVC, hard PVC, ABS, polystyrene plastics, Umakart, polyester and epoxy laminates; not suitable for coatings on PE, PP, PTFE). For plastics of unknown composition, a test coat must be done beforehand. It is suitable for painting window frames and sashes, including plastic windows, doors, door frames, bodies of central heating systems, school boards, furniture, such as wooden, metal, and plastic chairs, shelves, benches, carpet beaters, playground equipment, etc. ETERNAL mat Revital is suitable for both new and renovation coatings.

Application:
ETERNAL mat Revital is applied to a dry, perfectly cleaned, and degreased substrate free from loose particles and residues of non-adhering coatings with a brush, roller, pneumatic or high-pressure airless spraying, at substrate and ambient temperatures ranging from 8 °C to 30 °C and relative humidity max. 75%. Depending on the chosen application technology, the coating material is diluted with water up to max. 15% by weight. For application by high-pressure airless spraying, ETERNAL mat Revital is not diluted. It is sprayed at a pressure of 160 bar with nozzle no. 311 or larger (confirmed on VYZA vario equipment). ETERNAL mat Revital is applied in two to three coats depending on the desired thickness, within a time interval of at least 2 hours (20 °C). At lower temperatures and higher relative humidity, the time interval needs to be
extended. Extension is also necessary for highly absorbent substrates.

Consumption (final coat):

• wood, fiberboard 0.22 – 0.35 kg/m²
• metals 0.20 – 0.25 kg/m²
• concrete, plaster 0.30 – 0.35 kg/m²

Coating steel substrates:
Steel substrates must be carefully cleaned from corrosion products, mechanical impurities, residues of loose old coatings, and degreased (preferably with a solution of ETERNAL degreaser concentrate or another suitable detergent followed by rinsing with water). The prepared and dried substrate is treated with one to two coats of ETERNAL anti-corrosion acrylic paint or ETERNAL for metals with an interval of 4 hours between coats. After the anti-corrosion coat has dried, two layers of ETERNAL mat Revital paint are applied with a time interval of 2 hours between coats.

Coatings of wood, fiberboard, and chipboard:
The substrate is thoroughly cleaned of dust and mechanical impurities, resin spots are removed (e.g., by washing with nitro thinner), and the surface is saturated with FORTEKRYL primer with protective effects against wood-destroying and wood-coloring fungi and wood-destroying insects. In dry interiors, the penetrating agent FORTE penetral can also be used. After drying the penetration, the surface is sanded with fine sandpaper. Fiberboard and chipboard are then treated with one coat of ETERNAL In stop isolating paint to prevent the potential migration of colored stains from the substrate to the top coat. After the isolating coat has dried, the surface is sanded with fine sandpaper. Two coats of ETERNAL mat Revital paint are applied to the prepared substrate with a time interval of 2 hours between coats.

Coatings of concrete surfaces and plasters:
Mineral substrates must be cleaned of non-adhering coatings, mechanical impurities, degreased thoroughly (ETERNAL degreaser). The dry substrate is saturated with FORTE penetral product and after it has dried, two coats of ETERNAL mat Revital paint are applied with an interval of 3 hours between coats. For saturating very absorbent substrates (plasters), ETERNAL mat Revital diluted with water in a ratio of 1:1 can also be used. Mineral substrates must be sufficiently carbonated.

Coatings of cement-bonded particle boards:
Cement-bonded particle boards must be sufficiently carbonated. The surface of the boards must be thoroughly cleaned of mechanical impurities, non-adhering old coatings, degraded surface layers, and grease. The prepared substrate is thoroughly saturated with a special penetrating agent FORTE penetral. Penetration is best achieved with one coat until the substrate is saturated. When the dried penetrating agent begins to form a shiny film on the surface, the penetration is stopped. After a minimum of six hours from penetration, two coats of ETERNAL mat Revital paint are applied with a technological break of 4 hours between coats.

Coatings of plastics:
The surface of plastics must be thoroughly cleaned, free of any residues of old non-adhering surface treatments, glues, separators, protective films, and degreased (preferably with a solution of ETERNAL degreaser concentrate or another suitable detergent followed by rinsing with water). Glossy surfaces should be lightly sanded with fine sandpaper (No. 360 or finer). Two coats of ETERNAL mat Revital paint are applied to the prepared substrate with a technological break of 4 hours between coats