Eternal mat Revital color for renewing old coatings, RAL 6018 Yellow Green, 350 g

ETERNAL mat Revital is a universal silk-matt water-based coating material for indoor and outdoor use, prepared from a special cross-linkable dispersion of acrylic copolymers, pigments, fillers, and additives. It forms relatively hard, elastic matte coatings with high weather resistance and excellent blocking resistance, even at higher temperatures. It is characterized by very good coverage, good flow, quick drying, and excellent adhesion even to old synthetic and oil-based coatings. ETERNAL mat Revital meets the requirements of ČSN EN 71 part 3 Safety of toys Migration of certain elements.

Field of application:
ETERNAL mat Revital is intended for indoor and outdoor coatings of wood, fiberboard, particleboard, and cement-bonded particle boards, drywall, non-walkable concrete, metal substrates coated with anti-corrosion paint, and some types of plastics (durable PVC, hard PVC, ABS, polystyrene plastics, Umakart, polyester, and epoxy laminates; not suitable for coatings on PE, PP, PTFE). A test coating should be conducted on plastics with unknown composition. It is suitable for painting window frames and sashes, including plastic windows, doors, door frames, radiators, blackboards, furniture such as wooden, metal, and plastic chairs, shelves, benches, rug beaters, playground equipment, etc. ETERNAL mat Revital is suitable for both new and renovation coatings.

Application:
ETERNAL mat Revital is applied to a dry, perfectly cleaned, and degreased substrate free of non-adhering particles and residues of non-stick coatings using a brush, roller, pneumatic or airless spraying, at ambient and substrate temperatures ranging from 8 °C to 30 °C and maximum relative humidity of 75%. Depending on the chosen application technology, the coating material is diluted with water up to a maximum of 15% by weight. For application by high-pressure airless spraying, ETERNAL mat Revital is not diluted. It is sprayed at a pressure of 160 bar with nozzle No. 311 or larger (confirmed on VYZA vario equipment). ETERNAL mat Revital is applied in two to three coats depending on the desired thickness, with a time interval of at least 2 hours (20 °C). At lower temperatures and higher relative humidity, the time interval must be extended. Extension is also necessary for highly absorbent substrates.

Consumption (final coat):

• wood, fiberboards 0.22 – 0.35 kg/m²
• metals 0.20 – 0.25 kg/m²
• concrete, plaster 0.30 – 0.35 kg/m²

Coating steel substrates:
Steel substrates must be thoroughly cleaned of corrosion products, mechanical impurities, residues of loose old coatings, and degreased (preferably with a solution of ETERNAL degreaser concentrate or another suitable detergent followed by rinsing with water). The prepared and dried substrate is coated with one or two coats of ETERNAL anticorrosive acrylic paint or ETERNAL for metals with an interval of 4 hours between coatings. After the anticorrosive coat has dried, two layers of ETERNAL mat Revital are applied with a time interval of 2 hours between coats.

Coatings of wood, fiberboards, and particleboards:
The substrate is thoroughly cleaned of dust and mechanical impurities, resin spots are removed (e.g., washed with thinner), and the surface is impregnated with FORTEKRYL impregnating agent with protective effects against wood-destroying and wood-discoloring fungi and wood-destroying insects. In dry interiors, a penetrating agent FORTE penetral can also be used. After drying the penetration, the surface is sanded with fine sandpaper. Fiberboards and particleboards are then coated with one layer of isolation paint ETERNAL In stop to prevent potential color stains from the substrate penetrating into the top coat. After drying the isolation paint, the surface is sanded with fine sandpaper. Two coats of ETERNAL mat Revital are then applied to the prepared substrate with a time interval of 2 hours between coats.

Coatings of concrete surfaces and plasters:
Mineral substrates must be free of non-adhering coatings, mechanical impurities, and any oily surface must be thoroughly degreased (ETERNAL degreaser). The dry substrate is impregnated with FORTE penetral, and after it dries, two coats of ETERNAL mat Revital are applied with an interval of 3 hours between coats. For impregnating very absorbent substrates (plasters), ETERNAL mat Revital diluted with water in a ratio of 1:1 can also be used. Mineral substrates must be sufficiently carbonated.

Coatings of cement-bonded particleboards:
Cement-bonded boards must be sufficiently carbonated. The surface of the boards must be thoroughly cleared of mechanical impurities, non-adhering old coatings, degraded surface layers, and grease. The prepared substrate is thoroughly saturated with a special penetrating agent FORTE penetral. We impregnate preferably with one coat until the substrate is saturated. When the dried penetrating agent starts to create a glossy film on the surface, we stop the penetration. After a minimum of six hours after impregnation, two coats of ETERNAL mat Revital are applied with a technological break of 4 hours between coats.

Coatings of plastics:
The surface of plastics must be thoroughly cleaned, free of any residues of old non-adhering surface treatments, adhesives, separators, protective films, and degreased (preferably with a solution of ETERNAL degreaser concentrate or another suitable detergent followed by rinsing with water). Glossy surfaces are recommended to be lightly sanded with fine sandpaper (No. 360 or finer). On such prepared substrate, two coats of ETERNAL mat Revital are applied with a technological break of 4 hours between coats