Luxol Original thin-film wood stain, 0060 pine, 3.5 l

The decorative thin-film wood stain Luxol Original provides protection against weather influences and UV radiation. The innovative formula offers improved properties such as higher water repellency, high adhesion of the next coat, mechanical resistance, and deep penetration into the substrate. Thanks to the new creamy consistency, it spreads more easily and is easy to apply. The stain is characterized by the durability of color shades with a matte satin appearance. The coat created does not prevent the wood from breathing and is more environmentally friendly due to the reduced VOC content.

The Luxol Original thin-film stain is suitable for the painting of all wooden building components and structures in outdoor applications, including fences, doors, pergolas, garden furniture, house cladding, shutters, cottages, and other outdoor wooden structures. The product is also suitable for indoor work, where you will appreciate the minimal odor and faster drying time.

Drying time:
touch dry: 3h sandable/second coat: 8-14h fully dry: 24h

Instructions for use:
for outdoor coatings, it is recommended to treat the substrate with a fungicidal primer. Apply Luxol Original on a dry and clean surface. Remove any skin. Mix the contents thoroughly before use. Do not dilute. Apply LUXOL ORIGINAL with a brush in the direction of the fibers. Carry out the painting in stable and dry weather. For indoor use, apply 1-2 layers. To create long-lasting protection outdoors, apply 2-3 layers. The interval between applying individual layers is 8-14 hours. Touch dry after approximately 3 hours, fully cured after 24 hours. Lightly sand the coat before applying the next layer. Apply LUXOL ORIGINAL at temperatures between 5-30 °C and relative humidity lower than 85%. Low temperatures and high humidity can significantly affect drying. Clean working tools with technical benzene or solvent S6006. Remove as much paint as possible from the brush before cleaning.

WARNING:
claims regarding color shades will only be accepted if a test coat was made before implementation and it was reported to us. When using the same production batch, the same color shade is guaranteed. We recommend mixing shades from different batches in a larger container before application. The colorless shade is not suitable for outdoor use. The type, surface, and previous coating of the wood influence the resulting shade of the paint, so we recommend performing a test coat before the final application. Dispose of any unused product or empty container with residues at a hazardous waste collection point or hand it over to a person authorized to handle hazardous waste. Do not use empty containers for storing food.

Product safety warning (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P262: Avoid contact with eyes, skin, or clothing.
• P312: If you feel unwell, call the National Poison Center/doctor.
• P501: Dispose of contents/container in accordance with local regulations.