Luxol Original thin-layer wood stain, 0022 rosewood, 3.5 l

Luxol Original is a thin-layer wood stain for decorative coatings on wood with protection against weathering and UV radiation. The new formula has improved properties such as increased water repellency, high adhesion for subsequent coatings, mechanical resistance, and deep penetration. Thanks to the new creamy consistency, it spreads better and is easy to apply. The stain features lasting color shades with a matte satin appearance. The coating does not restrict the breathing of the wood, and due to the reduced VOC content, it is also more environmentally friendly.

The Luxol Original thin-layer stain is suitable for coating all building components or wooden structures such as fences, doors, pergolas, garden furniture, house cladding, shutters, cottages, chalets, and other wooden structures in the exterior. The stain is also good for indoor painting as it has minimal odor and dries faster.

Drying time:
touch dry: 3h sandable/second coat: 8-14h fully dry: 24h

Instructions for use:
for outdoor coatings, it is recommended to treat the substrate with a fungicidal primer. Apply Luxol Original to a dry and clean surface. Remove any skin that may have formed. Thoroughly mix the contents before use. Do not dilute. Apply LUXOL ORIGINAL with a brush in the direction of the grain. Perform the coating in stable and dry weather. For indoor use, apply 1-2 layers. To create long-lasting protection in the outdoor environment, apply 2-3 layers. The interval between applying individual layers is 8-14 hours. Touch dry after approximately 3 hours, fully dry after 24 hours. Before applying another layer, lightly sand the coating. Apply LUXOL ORIGINAL at temperatures of 5-30 °C and relative humidity below 85%. Low temperature and high humidity can significantly affect drying. Clean working tools with technical benzene or thinner S6006. Remove as much paint as possible from the brush before cleaning.

WARNING:
complaints about color shades will only be accepted if a test coat was made before implementation and this was reported to us. The same color shade is guaranteed when using the same production batch. We recommend mixing color shades from different batches in a larger container before application. The colorless shade is not suitable for outdoor use. The type, surface, and previous coating of the wood affect the final shade of the coating, so we recommend conducting a test coat before final application. Unused product or empty container with residues should be disposed of at a hazardous waste collection point or handed over to a person authorized to handle hazardous waste. Do not use empty containers for storing food.

Product safety warning (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P262: Avoid contact with eyes, skin, or clothing.
• P312: If you feel unwell, call the POISON INFORMATION CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container according to product instructions.