Luxol Original thin-layer wood stain, 0021 walnut, 3.5 l

The decorative thin-layer wood stain Luxol Original reliably protects the substrate from bad weather and the effects of UV radiation. The improved formula provides enhanced properties, including higher water repellency, excellent adhesion for subsequent coats, resistance to mechanical damage, and deep penetration. Thanks to the new creamy consistency, the product is easier to apply and spreads better. The stain is characterized by the durability of color shades with a matte satin effect. The layer allows the wood to breathe freely and, due to the reduced amount of VOCs, is environmentally friendly.

The use of the Luxol Original thin-layer stain is ideal for all building elements and wooden structures, such as pergolas, fences, doors, garden furniture, house cladding, shutters, cottages, and other outdoor wooden objects. The product is also well-suited for interior use, where its minimal odor and faster drying time are advantages.

Drying time:
dry to the touch: 3h sandable/second coat: 8-14h fully dried: 24h

Instructions for use:
for outdoor applications, it is recommended to pre-treat the substrate with a fungicidal primer. Apply Luxol Original to a dry and cleaned surface. Remove any skin that may have formed. Before use, mix the contents thoroughly. Do not dilute. Apply LUXOL ORIGINAL with a brush in the direction of the grain. Carry out the application in stable and dry weather. For indoor use, apply 1 - 2 coats. For long-lasting outdoor protection, apply 2-3 coats. The interval between applying each layer is 8 -14 hours. Dry to the touch after about 3 hours, fully dried after 24 hours. Before applying the next coat, lightly sand the previous coat. Apply LUXOL ORIGINAL at temperatures of 5-30 °C and relative humidity below 85%. Low temperatures and high humidity can significantly affect drying time. Clean tools with technical benzene or thinner S6006. Before cleaning, remove as much paint as possible from the brush.

WARNING:
color shade complaints will be accepted only if a test application was made before the execution and this was reported to us. If the same production batch is used, the same color shade is guaranteed. We recommend mixing color shades from different batches in a larger container before application. A colorless shade is not suitable for outdoor use. Type, surface, and previous coat of the wood affect the final shade of the coating, so we recommend performing a test coat before the final application. Dispose of any unused product or empty container with residues at a hazardous waste collection point or hand it over to a person authorized to handle hazardous waste. Do not use empty containers for food storage.

Product safety warning (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P262: Avoid contact with eyes, skin or clothing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor.
• P501: Dispose of contents/container according to product instructions.