Industrol S2013 universal glossy topcoat for metal and wood, 5400 dark green, 600 ml

Synthetic glossy topcoat for wood and metal

CHARACTERISTICS AND USE:

The product is intended for glossy topcoats on metals, wood, and materials such as masonry for outdoor and indoor use. The substrate must always be primed with an appropriate base coating material. The product has excellent coverage, high gloss, and very good weather resistance. It has good flow and workability. It is produced in a wide range of shades. The product has long-term shelf life during which the useful properties of the coating do not change. The product is suitable for painting fences, doors, frames, sills, small structures, and industrial items, wooden furniture and cladding, garden furniture, washable and abrasion-resistant wall coatings.

Key properties:

• Long-lasting weather resistance
• Stable gloss
• Urethanized binder

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free from resin residues before application. Concrete or masonry substrates must be dry, cohesive, clean, well-cured (usually 4 – 6 weeks), and structurally insulated against ground (bottom) moisture. Metal substrates must be clean, dry, free of grease, rust, and dust, mechanically cleaned. Absorbent substrates must be further impregnated with an appropriate primer and possibly treated with a suitable base material. Metal substrates must be treated with an appropriate anti-corrosive base material. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one coat

WORKING PROCEDURE:

Before use, mix the contents thoroughly and dilute if necessary.

Coating metal items:
1.) 1x PRAGOPRIMER STANDARD S2000 or FORMEX BASE ON GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035
2.) local filling with putty, sanding the filled area with sandpaper
3.) 1x PRAGOPRIMER STANDARD S2000 or PRAGOPRIMER UNIVERSAL S2035
4.) sanding with sandpaper No. 280-320 wet
5.) 2 to 3x INDUSTROL UNIVERSAL S2013

Coating wooden items:
1.) 1x impregnate with Lazurolem Classic S1023, drying 24 hours.
2.) 1-2x PRAGOPRIMER PLUS S2070 or LAZUROL OKNOBAL BASE S2060.
3.) 2-3x EMAL INDUSTROL UNIVERSAL S2013. Each coat of enamel must dry for at least 24 hours (20 °C).

You may find covering material, such as paper masking tape or covering film, possibly sandpapers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce hazardous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapour.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of soap and water
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P314: Get medical advice/attention if you feel unwell.
• P501: Dispose of contents/container to local regulations.