Industrol S2013 universal gloss topcoat for metal and wood, 1999 black, 9 l

Top synthetic glossy enamel for wood and metal

CHARACTERISTICS AND USE:

The product is designed for glossy top coats of metals, wood, and materials like masonry for outdoor and indoor use. The substrate must always be treated with an appropriate primer. The product has excellent coverage, high gloss, and very good weather resistance. It has good flow and workability. It is manufactured in a wide range of shades. The product has long-term storability, during which the useful properties of the paint do not change. The product is suitable for painting fences, doors, frames, sills, small structures, and industrial items, wooden furniture and paneling, garden furniture, washable and abrasion-resistant wall coatings.

Key features:

• Long-term resistance to weather conditions
• Stable gloss
• Uretanized binder

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, free from resin residues before application. Concrete or masonry substrates must be dry, cohesive, cleaned, well-cured (usually 4 – 6 weeks), and structurally insulated against ground (bottom) moisture. Metal substrates must be clean, dry, free from grease, rust, and dust, mechanically cleaned. Absorbent substrates must also be impregnated with an appropriate impregnator and possibly treated with a suitable primer. Metal substrates must be treated with a suitable anti-corrosive primer. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one layer

WORKING PROCEDURE:

Before use, stir the contents thoroughly and dilute if necessary.

Painting metal items:
1.) 1x PRAGOPRIMER STANDARD S2000 or FORMEX PRIMER FOR GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035
2.) local filling with putty, sanding the filled area with sandpaper
3.) 1x PRAGOPRIMER STANDARD S2000 or PRAGOPRIMER UNIVERSAL S2035
4.) sanding with sandpaper no. 280-320 wet
5.) 2 to 3x INDUSTROL UNIVERSAL S2013 paint

Painting wooden items:
1.) 1x impregnate with Lazurolem Classic S1023, drying time 24 hours.
2.) 1-2x PRAGOPRIMER PLUS S2070 or LAZUROL WINDOW SEAL PRIMER S2060.
3.) 2-3x INDUSTROL UNIVERSAL S2013 enamel. Each coat of enamel must dry for at least 24 hours (20 °C).

You may find covering materials, such as paper adhesive tape or covering foil, or possibly sandpapers. Don’t forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of soap and water
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P314: If you feel unwell, seek medical advice/treatment.
• P501: Dispose of contents/container in accordance with the instructions on the product.