Pragoprimer Plus S 2070 basic wood paint, 0100 white, 2.5 l

Basic synthetic wood paint.

CHARACTERISTICS AND USE:

The paint is intended for priming and undercoating of wooden products exposed to direct weather conditions, such as wooden structures, wooden windows, frames, or doors. It is also suitable for interior use, such as wooden furniture including wooden kitchen paneling and fiberboard. The coating excels in very good hiding power, good flow, and quick drying. The coating has high filling capacity and is well sandable.

Key properties:

• excellent sandability
• high hiding power
• high filling capacity

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free from resin residues before application. Wood with a high resin content (larch, pine) must be cleaned of all resin exudations beforehand, for example, by washing with nitro thinner BALTECH C6000. The quality of wood pre-treatment affects the overall appearance of the final wood finish and also the overall durability of the coating system.
The surface of the wood must first be treated with a suitable impregnating agent that ensures uniform absorbency of the substrate and higher protection of the wood (in the case of using a fungicidal impregnating agent, it also provides protection against attack by mold, fungi, and insects). Subsequently, the surface of the wood must be sanded with fine sandpaper before applying the basic wood paint. In renovation coatings, the wood must be stripped of old non-adhering coatings and good substrate adhesion must be ensured (when completely removing the old coating, the new coating is done gradually, including the impregnation of the wood).

DILUTION: thinner BALTECH S6006

Theoretical coverage: 15 - 17 m2/l

WORKING PROCEDURE:

Before use, thoroughly mix the contents. It is not diluted; the paint is already at application viscosity.
Interior wood coating
1. 1x impregnation of the substrate with the glazing varnish LAZUROL CLASSIC S1023 or UNIBAL IMPREGNATING VARNISH O1000, 24 hours drying, sanding
2. 1 to 2x coat with the basic paint PRAGOPRIMER PLUS S2070 (recommended interval between coats 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 1 to 2x coat with the top enamel LAZUROL OKNOBAL EMAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Outdoor wood coating
1. 1x impregnation of the substrate with the fungicidal impregnating agent LAZUROL IMPREGNATING BASE S1033, 24 hours drying; sanding
2. 1 to 2x coat with the basic paint PRAGOPRIMER PLUS S2070 (recommended interval between coats 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 2 to 3x coat with the top enamel LAZUROL OKNOBAL EMAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P501: Dispose of contents/container according to product instructions.