Pragoprimer for Industry S2000P Basic Color for Metal and Absorbent Substrates, 0840 Red-Brown, 10 kg

Basic synthetic anti-corrosive paint for metal.

CHARACTERISTICS AND USE:

Universal primer with excellent anti-corrosive properties, very quick drying, and universal applicability. The paint is intended for primer coatings on steel and iron for indoor and outdoor environments, particularly under synthetic air-drying coatings. The paint can also be used for coating non-metallic objects, but absorbent substrates must be pre-treated with suitable impregnating paint. Examples of use: metal structures, machines, metal furniture, frames.

Key Properties:

• excellent adhesion to steel surfaces
• excellent anti-corrosive properties
• very quick drying
• suitable for industrial applications

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, rust, and dust, mechanically cleaned. First, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 technical benzene, BALTECH P6401 acetone, or where possible, hot pressurized water with a surfactant). To remove any remaining salts, the surface must be rinsed with clean water afterward. Coarse and well-adhered dirt must be removed manually or mechanically (sanding, scraping). Any rust can also be removed manually or mechanically (metal brushes, grinding discs) or using rust removers. If chemical rust removers are used, subsequent rinsing with clean water is necessary.
Absorbent substrates must first be treated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001P (spraying)

Theoretical Coverage: 12 - 15 m²/kg per coat

APPLICATION PROCEDURE:

Before use, stir the contents thoroughly and dilute as needed. Apply with a brush, roller, or spray on the pre-prepared substrate.
Coating / Spraying of Metal:
When applying by spraying, first treat problem areas (corners, edges, seams, surface imperfections) with a so-called strip coating using a brush, and only after this coating has slightly dried, spray the entire area (including the already coated problem areas).
1. 1x paint PRAGOPRIMER FOR INDUSTRY S2000P, drying of the coating 24 hours. The optimal thickness of one layer is 25 - 30 µm. Drying on metal items can be accelerated by forced drying up to 80 °C
2. filling as needed with, for example, polyester filler BKP Rapid TOS
3. sanding of filled areas with sandpaper No. 180 - 220 wet
4. 1x PRAGOPRIMER FOR INDUSTRY S2000P
5. sanding with sandpaper No. 280
6. 2 to 3x enamel INDUSTROL UNIVERSAL S2013, INDUSTROL PLUS S2071, INDUSTROL PROFI U2129 or matte INDUSTROL UNIMAT S2075

You might need covering material, such as paper masking tape or covering foil, or possibly sanding papers. Don’t forget brushes and rollers.

Product Safety Warnings (H-statements)

• EUH211: Warning! Spraying may create hazardous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe Handling Instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.