Pragoprimer Plus S 2070 base color for wood, 0100 white, 600 ml

Base synthetic paint for wood.

CHARACTERISTICS AND USE:

The paint is intended for base and primer coatings for wood product surface treatment systems that are exposed to direct weather influences, such as wooden structures, wooden windows, frames, or doors. It is also suitable for interior use, such as wooden furniture including wooden kitchen paneling and fiberboard. The coating features very good coverage, good flow, and quick drying. The coating has high filling capacity and is easily sandable.

Key properties:

• excellent sandability
• high coverage
• high filling capacity

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a moisture content of max. 12%, free of resin residues before application. Wood with a high resin content (larch, pine) must be freed from all resin exudations beforehand, for example by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final wood surface treatment and also the overall durability of the coating system.
The surface of the wood must first be impregnated with a suitable impregnant that ensures even absorbency of the substrate and higher protection of the wood (if a fungicidal impregnant is used, it also provides protection against mold, fungi, and insects). Subsequently, the wood surface must be sanded with fine sandpaper and only then should the base wood paint be applied. For renovation coatings, the wood must be stripped of old non-adhering coatings and good substrate strength ensured (when removing the old coating completely, the new coating is applied gradually, including wood impregnation).

DILUTION: thinner BALTECH S6006

Theoretical yield: 15 - 17 m2/l

WORKING PROCEDURE:

Before use, thoroughly mix the contents. It should not be diluted, the paint is already at application viscosity.
Indoor wood coating
1. 1x impregnation of the substrate with LAZUROL CLASSIC S1023 or UNIBAL FERMEŽ NAPOUŠTĚCÍ O1000, 24 hours drying, sanding
2. 1 to 2x coating with PRAGOPRIMER PLUS S2070 base paint (recommended interval between coats 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 1 to 2x coating with LAZUROL OKNOBAL EMAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Outdoor wood coating
1. 1x impregnation of the substrate with fungicidal impregnant LAZUROL IMPREGNAČNÍ ZÁKLAD S1033, 24 hours drying; sanding
2. 1 to 2x coating with PRAGOPRIMER PLUS S2070 base paint (recommended interval between coats 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 2 to 3x coating with LAZUROL OKNOBAL EMAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER or doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container according to instructions on the product.