Karbolineum Extra 3v1 wood stain, amber, 3.5 kg

Modern impregnation coating with decorative properties. It acts as an effective deep penetrating preservative and at the same time as a top protective coat in ten color shades. It contains very fine transparent pigments that provide the wood with the desired shade while enhancing its natural texture. Along with other functional additives, it effectively protects against all weather influences including UV radiation. The coating does not seal the wood, allowing moisture regulation, it does not crack or peel. After complete drying, it is completely odorless. The coating film is treated with biocidal substances against attacks by moss, fungi, algae, and molds. The clear shade is not sufficient on its own in exterior applications for protection against UV radiation. It is used as a preservative under color shades or as an additional coat that protects previous layers and prolongs their lifespan.

Renewal is carried out after 3 – 6 years, depending on local conditions, by simply overcoating, without the need to remove the old coating. Karbolineum extra is a product with a long-standing tradition. Due to its unique properties, this coating has become the most commonly used product for painting historic objects, shingle roofs, wooden facades, log cabins, and last but not least, monuments of folk architecture. Karbolineum extra is a product subject to regular certification oversight. It has been issued a Construction Technical Certificate No. STO-AO 224-500/2012/a. Its effectiveness and protective properties are regularly checked by the Institute for Testing and Certification, a.s., Zlín (Authorized person No. 224).

Usage:
Wooden construction structures in exterior and interior, wooden facades, shingle roofs, cottages, cabins, cladding, pergolas, gazebos, carports, fences, windows, shutters, and others.

Preparation of the substrate and application method:
Before use, mix the product thoroughly or shake it. The wood to be painted must be dry (relative humidity max. 15%), free from old coatings and other mechanical and vegetative impurities including resin exudates. It is applied with a brush, roller, spray gun, or dipping in one or more layers. The application of another layer should always be done after the previous one has soaked in. The coat should completely penetrate into the wood before drying to avoid glossy spots. Drying time - usually up to 24 hours - depends on the temperature and air circulation, humidity, and absorption of the substrate. On smoothly processed and low-absorbent wood, this time may be longer. The resulting shade may vary depending on the type of wood being painted. It is recommended to carry out a trial application on a smaller area.

Dilution:
Not diluted. Thinner S6005 or S 6006 for cleaning tools.

Coverage:
It is recommended to apply at least 150 g/m2 (6.7m2 from 1 kg) to ensure adequate effectiveness of protection.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P262: Avoid contact with eyes, skin or clothing.
• P264: Wash hands thoroughly after handling.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGY INFORMATION CENTER/doctor.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGY INFORMATION CENTER/doctor.
• P331: DO NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.