Karbolineum Extra 3v1 wood stain, fir, 3.5 kg

A modern impregnation coating with decorative properties. It acts as an effective deep-penetrating primer and simultaneously as a top protective coat in ten color shades. It contains very fine transparent pigments that give wood the desired shade while enhancing its natural texture. Together with other functional additives, it effectively protects against all weather influences, including UV radiation. The coating does not seal the wood, allows moisture regulation, does not crack or peel. After complete drying, it is completely odorless. The coating film is treated with biocidal agents to prevent attacks by moss, mold, algae, and fungi. The colorless shade is not a sufficient protection against UV radiation when used outdoors. It is used as an impregnating primer under color shades or as an additional coat that protects previous layers and extends their lifespan.

Renewal is carried out after 3 – 6 years, depending on local conditions, by simple re-coating without the need for removing the old coating. Karbolineum extra is a product with a long tradition. Thanks to its unique properties, this coating has become the most used product for painting historical buildings, shingle roofs, wooden facades, log cabins, and last but not least, monuments of folk architecture. Karbolineum extra is a product subject to regular certification supervision. A Construction Technical Certificate No. STO-AO 224-500/2012/a has been issued for it. Its effectiveness and protective properties are regularly checked by the Testing and Certification Institute, a.s., Zlín (Authorized person No. 224).

Usage:
Construction wooden structures in exteriors and interiors, wooden facades, shingle roofs, cottages, cabins, cladding, pergolas, gazebos, carports, fences, windows, shutters, and others.

Surface preparation and application method:
Before use, thoroughly mix the product, or shake it. The wood to be painted must be dry (rel. humidity max. 15%), free from old coatings and other mechanical and vegetative impurities, including resin exudates. It can be applied with a brush, roller, spray gun, or by immersion in one or more layers. The application of another layer should always be done only after the previous one has soaked in. The coating should completely penetrate into the wood before drying to avoid glossy spots. The drying time - usually up to 24 hours - depends on temperature and air flow, humidity, and absorbency of the substrate. On smoothly processed and low-absorbent wood, this time may be longer. The final shade may vary depending on the type of wood being painted. It is recommended to perform a test coat on a small area.

Dilution:
Do not dilute. Thinners S6005 or S 6006 for cleaning tools.

Yield:
It is recommended to apply at least 150 g/m2 (6.7m2 from 1 kg) to ensure sufficient protective effectiveness.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P262: Avoid contact with eyes, skin or clothing.
• P264: After handling, thoroughly wash all exposed body parts, such as hands
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGICAL INFORMATION CENTER/doctor
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor
• P331: DO NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Seek medical advice/treatment.
• P501: Dispose of contents/container in accordance with product instructions.