Karbolineum Extra 3in1 wood stain, chestnut, 3.5 kg

Modern impregnation coating with decorative properties. It acts as an effective deep-penetrating impregnant and at the same time as a top protective coat in ten color shades. It contains very fine transparent pigments that give the wood the desired hue while enhancing its natural texture. Together with other functional additives, it effectively protects against all weather influences, including UV radiation. The coating does not seal the wood, allowing it to regulate moisture, it does not crack or peel. Once fully dry, it is completely odorless. The coating film is treated with biocidal substances against moss, mold, algae, and fungi. The colorless shade is not sufficient as a standalone protection against UV radiation in outdoor conditions. It is used as an impregnation primer under color shades or as an additional coat that protects previous layers and extends their lifespan.

Renewal is carried out every 3-6 years, depending on local conditions, by simply reapplying, without the need to remove the old coat. Karbolineum extra is a product with a long-standing tradition. Due to its unique properties, this coating has become the most commonly used preparation for coating historic buildings, shingle roofs, wooden facades, log cabins, and, last but not least, monuments of folk architecture. Karbolineum extra is a product subject to regular certification oversight. A construction technical certificate No. STO-AO 224-500/2012/a has been issued for it. Its effectiveness and protective properties are regularly checked by the Institute for Testing and Certification, a.s., Zlín (Authorized person No. 224).

Usage:
Construction wooden structures in outdoor and indoor conditions, wooden facades, shingle roofs, cottages, chalets, cladding, pergolas, gazebos, carports, fences, windows, shutters, and others.

Surface preparation and application method:
Before use, mix the preparation thoroughly or shake it. The wood to be painted must be dry (relative humidity max. 15%), free of old coatings and other mechanical and vegetative impurities, including resin exudates. It is applied with a brush, roller, spray gun, or by dipping in one or more layers. The application of another layer should always be done after the previous one has soaked in. The coat should penetrate completely into the wood before drying to avoid shiny spots. Drying time - usually up to 24 hours - depends on temperature and air flow, humidity, and the absorbency of the substrate. On smoothly processed and less absorbent wood, this time may be longer. The final shade may vary depending on the type of wood being painted. It is recommended to perform a test coat on a smaller area.

Dilution:
Does not dilute. Thinner S6005 or S6006 for cleaning tools.

Yield:
We recommend applying a minimum of 150 g/m2 (6.7m2 from 1 kg) to ensure adequate protective effectiveness.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P262: Avoid contact with eyes, skin, or clothing.
• P264: Wash all exposed parts of the body thoroughly after handling, such as hands
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call the Poison Center/doctor
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the Poison Center/doctor.
• P331: DO NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Seek medical advice/treatment.
• P501: Dispose of contents/container in accordance with product instructions.