FEST-B S2141, anti-corrosion coating for iron, 0280 brown, 800 g

Anti-corrosion self-priming paint containing graphite

CHARACTERISTICS AND USE:

The paint is particularly intended for single-layer outdoor protective coatings of sheet metal roofing, gutters, steel structures and other metal objects exposed to permanent weather conditions and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. The protection against paint degradation is guaranteed by the addition of graphite - Czech patent. Thanks to graphite, the paint is characterized by long-term resistance to weathering, water repellency, and effective barrier anti-corrosion protection.

Key properties:

• high and long-lasting durability
• effective graphite barrier protection
• excellent adhesion to substrate

SUBSTRATE PREPARATION:

The substrate must be dry, clean, free from dust, rust, and grease and mechanically cleaned before application. First, the surface must be degreased with an appropriate cleaning agent (e.g., BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone, or where possible, warm pressurized water with detergent). To remove any salt residues, rinse the surface with clean water afterward. Coarse and firmly adhering dirt should be removed manually or mechanically (scraping, sanding). Any corrosion can also be removed manually or mechanically (with wire brushes, sanding discs), or using a rust remover. If you choose a chemical rust remover, it is essential to wash the substrate with clean water afterward. Paint can be applied to galvanized sheet metal no sooner than one year after exposure to weather conditions.
Porous surfaces should first be treated with an appropriate primer to ensure uniform absorbency. Previously painted areas must be cleaned, degreased, and stripped of all non-adhering old coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/ kg per coat

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute as needed.
Apply 2 to 3 coats (spraying) of FEST-B 2in1 ROOF PAINT S2141. The recommended thickness of the dry film for one coat is 50 µm. If necessary, additional spray coats or applications can be applied either wet on wet (within approximately 3 hours) or after drying (after 24 hours).
The method of application affects the final appearance of the coat. The structure of the contained graphite may cause color differences (shading) during spreading, which, however, do not affect the protective properties of the coating.

When working, you will appreciate covering material, such as paper adhesive tape or covering foil, potentially sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may create dangerous respirable droplets.Do not inhale aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATIONCENTER/doctor
• P501: Dispose of contents/container in accordance with product instructions.