FEST-B S2141, anti-corrosive paint for iron, 0845 brick, 2.5 kg

Anti-corrosive primer paint with graphite content

CHARACTERISTICS AND USE:

The paint is especially designed for single-layer outdoor protective coatings for sheet metal roofs, gutters, steel structures, and other metal objects exposed to permanent weather influences and sunlight. Roof paint contains not only a corrosion inhibitor but also a UV radiation absorber that protects the paint binder against degradation. Protection against degradation of the coating is guaranteed by the addition of graphite - Czech patent. Thanks to graphite, the paint exhibits long-term resistance to weather influences, water repellency, and effective barrier anti-corrosive protection.

Key properties:

• high durability
• graphite barrier protection
• excellent adhesion to substrate

SUBSTRATE PREPARATION:

The substrate must be clean, dry, degreased, mechanically cleaned, and free from dust and rust before painting. First, the surface must be degreased with an appropriate cleaning agent (e.g., BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone, or possibly warm pressurized water with detergent). To remove any salt residues, rinse the surface with clean water afterwards. Rough and adhering dirt must be removed manually or mechanically (scraping, sanding). Any corrosion can also be removed mechanically or manually (with abrasive discs, wire brushes) or rust removers. When using chemical rust removers, it is essential to rinse with clean water afterward. On galvanized sheet metal, the paint should be applied only after one year of exposure to weather influences.
Absorbent substrates must be treated with a suitable primer to unify absorbency. Previously painted surfaces should be cleaned, degreased, and free from non-adhering old coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one layer

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute if necessary.
Apply 2 to 3 coats (spraying) of FEST-B 2in1 ROOF PAINT S2141. The recommended thickness of the dry paint film for one layer is 50 µm. If necessary, additional sprays or coats can be applied either wet on wet (within approximately 3 hours) or after drying (after 24 h).
The method of application affects the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, which, however, do not affect the protective properties of the coating.

You may find it useful to have masking materials, such as paper adhesive tape or masking foil, possibly sandpapers. Don't forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dry skin or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets.Do not inhale aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid inhalation of dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATIONCENTER/doctor.
• P501: Dispose of contents/container in accordance with product instructions.