FEST-B S2141, anti-corrosion coating for iron, 0101 light gray, 5 kg

Anti-corrosion self-priming paint with graphite content

CHARACTERISTICS AND USE:

The paint is primarily intended for single-layer outdoor protective coatings for metal roofing, gutters, steel constructions and other metal objects exposed to continuous weather influences and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorbent that protects the paint binder from degradation. Protection against paint degradation is guaranteed by the addition of graphite - Czech patent. Thanks to the graphite, the paint is characterized by long-term resistance to weather influences, water-repellency, and effective barrier anti-corrosion protection.

Key properties:

• long life
• graphite barrier protection
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate must be dry, clean, mechanically cleaned, and free from dust, rust, and grease before application. Firstly, the surface must be degreased with a suitable agent (e.g. BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone, or warm pressurized water with detergent where possible). To remove any residual salts, rinse the surface with clean water. Coarse and firmly adhered dirt should be removed manually or mechanically (by sanding, scraping). Any corrosion can also be removed mechanically or manually (using steel brushes, abrasive discs) or by using a rust remover. When applying a chemical rust remover, rinse the substrate with clean water afterward. Galvanized sheet metal can be painted no sooner than one year after exposure to weather conditions.
Absorbent materials should be pre-treated with an appropriate primer to unify absorbency. Previously painted surfaces must be stripped of non-adhering old coatings, cleaned, and degreased.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one coat

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute as necessary.
Apply 2 to 3 coats (sprays) of FEST-B 2-in-1 ROOF PAINT S2141. The recommended dry film thickness for one layer is 50 µm. If necessary, additional sprays or coats can be applied either wet on wet (within about 3 hours) or after drying (after 24 h).
The method of application affects the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, but these do not impact the protective properties of the coating.

You may find covering material useful, such as paper adhesive tape or covering foil, or sandpapers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May cause allergic reaction.
• EUH211: Warning! Spraying may create dangerous respirable droplets.Do not inhale aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Prevent release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P501: Dispose of contents/container in accordance with local regulations.