FEST-B S2141, anti-corrosive coating for iron, 0570 dark green, 5 kg

Anti-corrosive self-priming paint containing graphite

CHARACTERISTICS AND USE:

The paint is especially intended for single-layer outdoor protective coatings for metal roofing sheets, gutters, steel structures and other metal items exposed to continuous weather influences and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber, which protects the paint binder from degradation. The protection against degradation of the coating is guaranteed by the addition of graphite - Czech patent. Thanks to the graphite, the paint is characterized by long-term resistance to weather influences, water repellency, and effective barrier anti-corrosive protection.

Key properties:

• high durability
• graphite barrier protection
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate intended for application must be dry, clean, mechanically cleaned, and free from dust, rust, and grease. First of all, it is necessary to degrease the surface with a suitable cleaning agent (e.g. BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone, or where possible, warm pressurized water with detergent). To remove any remaining salts, the surface should then be rinsed with clean water. Coarse and stubborn dirt should be removed mechanically or by hand (scraping, sanding). Any corrosion can also be removed manually or mechanically (grinding discs, wire brushes), or using rust removers. When using chemical rust removers, always rinse the surface with clean water. Application of the coating on galvanized sheet metal is possible only after one year of weather exposure.
Absorbent materials should be pre-treated with a suitable impregnating agent to unify the absorbency of the substrate. Previously painted substrates should be thoroughly cleaned, degreased, and free from non-adhering old coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one coat

WORKING PROCEDURE:

Before use, mix the contents thoroughly and dilute if necessary.
Apply the coating (spraying) with FEST-B 2v1 FOR ROOFS S2141 two to three times. The recommended thickness of the dry paint film for one coat is 50 µm. If necessary, other sprays or coats can be applied either wet-on-wet (within approximately 3 hours), or after drying (after 24 h).
The method of application affects the final appearance of the coating. The structure of the contained graphite can cause color differences (shading) during spreading, which, however, do not affect the protective properties of the coating.

You may find covering material useful, such as paper masking tape or covering foil, possibly sanding papers. Don't forget brushes and rollers as well.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may create dangerous respiratory droplets.Do not breathe aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call the POISON CENTER/doctor.
• P501: Dispose of contents/container in accordance with product instructions.