FEST-B S2141, anti-corrosive paint for iron, 0540 green, 2.5 kg

Anti-corrosive self-priming paint with graphite content

CHARACTERISTICS AND USE:

The paint is especially intended for single-layer outdoor protective coatings of sheet metal roofing, gutters, steel structures and other metal objects exposed to permanent weather conditions and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. Protection against paint degradation is guaranteed by the addition of graphite - Czech patent. Thanks to the graphite, the paint is characterized by long-term resistance to weather effects, water repellency, and effective barrier anti-corrosive protection.

Key properties:

• long lifespan
• graphite barrier protection
• excellent adhesion

SUBSTRATE PREPARATION:

Before application, the substrate must be dry, clean, mechanically prepared, and free from dust, rust, and grease. As the first step, degrease the surface with a suitable cleaning agent (e.g., BALTECH P6402 Technical petrol, BALTECH P6401 Acetone, or possibly warm pressurized water with detergent). To remove any salt residues, rinse the surface with clean water afterward. Resistant and coarse dirt should be removed manually or mechanically (scraping, sanding). Any corrosion can also be removed mechanically or by hand (with grinding discs, metal brushes), or using a rust remover. If you use a chemical rust remover, rinse the substrate with clean water afterward. Apply the coating on galvanized sheet metal at least one year after exposure to weather conditions.
For absorbent substrates, it is first necessary to use a suitable saturator to achieve uniform absorbency. Clean, degrease, and remove original non-adhesive coatings from already painted surfaces.

DILUTION: Thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one layer

WORKING PROCEDURE:

Before use, thoroughly stir the content and dilute as needed.
Apply 2 to 3 coats (sprays) of FEST-B 2-in-1 ROOF PAINT S2141. The recommended thickness of the dry coat film for one layer is 50 µm. If necessary, additional sprays or coats can be applied either wet-on-wet (within about 3 hours) or after drying (after 24 h).
The method of application affects the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, which, however, do not affect the protective properties of the coating.

You might find covering material useful, such as paper masking tape or covering film, as well as sanding papers. Don't forget brushes and rollers.

Safety warnings for the product (H-phrases)

• EUH066: Repeated exposure may cause dry skin or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets can be generated during spraying.Do not inhale aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312: Call the POISON CENTER/doctor if you feel unwell.
• P501: Dispose of contents/container in accordance with manufacturer's instructions.