Karbolineum Extra 3v1 wood stain, teak, 700 g

The decorative impregnation coating in a modern design combines the effect of a deep-penetrating impregnant and a top protective layer in ten color variants. Thanks to the presence of very fine transparent pigments, it gives the wood the desired coloring while also highlighting its natural grain. In combination with other functional components, it effectively resists weather influences and UV radiation. The coating does not seal the wooden surface, allowing it to breathe and balance moisture, and it does not crack or peel. Once completely dry, it leaves no odor. The protective film contains biocidal substances that prevent attacks from mold, fungi, algae, and moss. In outdoor use, the colorless shade does not provide sufficient protection against UV radiation on its own; it is therefore used as a penetrating impregnant before applying tinted coatings or as a top layer that protects the underlying coatings and extends their lifespan.

Renovation is performed every 3 to 6 years depending on the surrounding conditions by simply retouching, without the need to remove the original layer. Karbolineum extra represents a product with a long tradition. Due to its specific properties, it is the most widely used means for treating log cabins, wooden facades, shingle roofs, historic buildings, and monuments of folk architecture. The product Karbolineum extra is subject to continuous certification supervision and has been issued a Construction Technical Certificate No. STO-AO 224-500/2012/a. Its protective capabilities and overall effectiveness are regularly tested by the Institute for Testing and Certification, a.s., Zlín (Authorized person No. 224).

Application:
building wooden structures in outdoor and indoor use, wooden facades, shingle roofs, cottages, chalets, cladding, pergolas, gazebos, parking sheds, fences, windows, shutters, and others.

Substrate preparation and application method:
Before use, thoroughly mix the preparation or shake it. The wood to be painted must be dry (relative humidity max. 15%), free of old coatings and other mechanical and vegetative impurities, including resin exudates. It is applied with a brush, roller, spray gun, or immersing in one or more layers. Application of an additional layer only after the previous one has soaked in. The coating should completely penetrate the wood before drying to avoid glossy spots. Drying time - usually up to 24 hours - depends on temperature and air circulation, humidity, and absorbency of the substrate. On smoothly processed and less absorbent wood, this time may be longer. The resulting shade may vary depending on the type of wood being painted. We recommend performing a test coat on a smaller area.

Dilution:
Not diluted. Thinner S6005 or S 6006 for cleaning tools.

Coverage:
It is recommended to apply a minimum of 150 g/m2 (6.7m2 from 1 kg) to ensure adequate effectiveness of protection.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P262: Avoid contact with eyes, skin, or clothing.
• P264: Wash all affected parts of the body thoroughly after handling, such as hands
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGICAL INFORMATION CENTER/doctor
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a TOXICOLOGICAL INFORMATION CENTER/doctor if you feel unwell.
• P331: DO NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.