Tlumex Plast anticorrosive paint for car and chassis, black, 2 kg

Asphalt anticorrosive and anti-abrasive coating for protecting the underside of car bodies. Excellent resistance to corrosive and abrasive effects of de-icing materials. Provides reliable anticorrosive and anti-abrasive protection during both summer and winter seasons. The dried coating is black, non-paintable, permanently elastic, and has excellent adhesion to metal substrates.

Used on the underside of car bodies and chassis. All metal materials in exterior applications requiring a high level of protection. Corroded surfaces must be mechanically cleaned and treated with a suitable chemical product (e.g., Fest Primer) before coating. Cardboard roofing, mechanically unloaded concrete, wood, and other materials.

Substrate preparation and application method:
Before use, TLUMEX® PLAST must be thoroughly mixed and applied to a dry surface, free from dust, greasy dirt, rust, and old non-adherent coatings. It can be applied using a brush, roller, or special spray gun at a temperature of at least +10 C. For areas with residual rust, it is recommended to use Fest Primer as the first coat. TLUMEX® PLAST can be applied in one to three layers, depending on needs, always after proper drying of the previous layer.

Dilution:
The coating is supplied in a consistency suitable for application; if needed, thinner S 6006 can be used for dilution. Diluting the product decreases the strength of the applied film and thus also the protective effect of the coating.

Coverage: 3 – 4 m2 in one layer from 1 kg of coating

Product safety warnings (H-statements)

• H226: Flammable liquid and vapor.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapor/aerosol.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call the TOXICOLOGICAL INFORMATION CENTER/doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with product instructions.