Pragoprimer Universal S2035 basic color for metal, 0840 red-brown, 600 ml

Basic synthetic fast-drying paint for iron and steel.

CHARACTERISTICS AND USE:

The paint is intended for primer coatings of metal objects for synthetic, oil, and nitrocellulose coatings. It is characterized by quick drying. It has excellent anti-corrosive properties and wide application possibilities indoors and outdoors.

Key properties:

• active anti-corrosive pigment
• quick drying
• suitable even under nitro-combination and polyurethane coatings

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, rust, and dust, and mechanically cleaned. Coating on galvanized sheet metal is possible only after 12 months of exposure to weather conditions.
First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 technical gasoline, BALTECH P6401 acetone, or where possible, warm high-pressure water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering impurities must be removed manually or mechanically (grinding, scraping). Any rust can also be removed manually or mechanically (metal brushes, sanding discs) or with rust removers. In the case of using chemical rust removers, subsequent rinsing with clean water is necessary.
Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: diluent BALTECH S6005 (brush, roller), BALTECH C6000 (spraying)

Theoretical coverage: 12 - 14 m²/l for one coat

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute if necessary.
1. 1x coat with PRAGOPRIMER UNIVERSAL S2035 paint. The coat dried in the air can be overcoated with synthetic or nitrocellulose enamel after 1 hour, optimal thickness of one layer 30 - 35 µm
2. 2 to 3x coats with top enamel INDUSTROL UNIVERSAL S2013, RADBAL STANDARD S2119, INDUSTROL PLUS S2071, INDUSTROL UNIMAT S2075 or INDUSTROL PROFI U2129. Optimal thickness of one layer 30 – 35 µm
   
You may find covering material, such as paper adhesive tape or covering film, possibly sanding papers. Don't forget about brushes and rollers.

Safety warnings for the product (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respiratory droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a TOXICOLOGICAL INFORMATION CENTER/doctor if you feel unwell.
• P501: Dispose of contents/container in accordance with product instructions.