Pragoprimer Plus S 2070 base paint for wood, 0100 white, 4 l

Basic synthetic paint for wood.

CHARACTERISTICS AND APPLICATION:

The paint is intended for priming and base coats for wood product surface treatment systems exposed to direct weather conditions, e.g. wooden structures, wooden windows, frames, or doors. It is also suitable for interior use, e.g. wooden furniture including wooden kitchen paneling and fiberboard. The coating excels in very good opacity, good flow properties, and quick drying. The coating has high filling ability and is easy to sand.

Key properties:

• excellent sandability
• high opacity
• high filling ability

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a maximum moisture content of 12%, free from resin residues before application. Wood with a high resin content (larch, pine) must be thoroughly cleaned of any resin exudation, e.g. by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final wood finish and also the overall durability of the coating system.
The surface of the wood must first be impregnated with a suitable primer that ensures uniform absorption of the substrate and greater protection of the wood (in the case of using a fungicidal primer, also protection against mold, fungi, and insects). The wood surface must then be sanded with fine sandpaper before applying the base paint for wood. In renovation coatings, old non-adherent coatings must be removed, ensuring good adhesion of the substrate (when completely removing the old coat, the new coat is applied gradually, including wood impregnation).

DILUTION: thinner BALTECH S6006

Theoretical coverage: 15 - 17 m2/l

APPLICATION PROCEDURE:

Before use, mix the contents thoroughly. Do not dilute; the paint is already at application viscosity.
Indoor wood coating
1. 1x impregnation of the substrate with LAZUROL CLASSIC S1023 or UNIBAL IMPREGNATING VARNISH O1000, 24 hours drying, sanding
2. 1 to 2 coats of base paint PRAGOPRIMER PLUS S2070 (recommended interval between coats 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 1 to 2 coats of top enamel LAZUROL OKNOBAL EMAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Outdoor wood coating
1. 1x impregnation of the substrate with fungicidal primer LAZUROL IMPREGNATING BASE S1033, 24 hours drying; sanding
2. 1 to 2 coats of base paint PRAGOPRIMER PLUS S2070 (recommended interval between coats 6 hours or more), optimal thickness of one layer 30-35 µm, sanding
3. 2 to 3 coats of top enamel LAZUROL OKNOBAL EMAIL U2015 or INDUSTROL PLUS S2071, INDUSTROL PROFI U2129

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! When spraying, hazardous respirable droplets may be formed. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER or doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with local regulations.