Pragoprimer Standard S2000 basic color for metal, 0100 white, 2.5 l

Basic synthetic anticorrosive paint

CHARACTERISTICS AND USE:

Pragoprimer Standard S2000 is a universal basic paint for metal and absorbent substrates for indoor and outdoor environments, especially under synthetic and air-drying coatings, for painting, for example, sheet metal structures, machines, metal and wooden furniture, etc. The paint has excellent anticorrosive properties, very fast drying, and universal applicability.

Key features:

• active anticorrosive pigment
• fast drying
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 technical gasoline, BALTECH P6401 acetone, or where possible, hot pressurized water with detergent). If residues of various salts remain, the surface must be subsequently rinsed with clean water. Coarse and well-adhered dirt must be removed manually or mechanically (by sanding, scraping). Any rust can also be removed manually or mechanically (metal brushes, sanding discs) or using rust removers. If chemical rust removers are used, it is necessary to rinse with clean water afterward.
Absorbent substrates must first be primed with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 18 - 21 m²/l for one layer

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute as needed. The paint is applied with a brush, roller, or spraying onto the pre-prepared substrate. 
Coating / spraying of metal:
When spraying, problematic areas (corners, edges, seams, surface defects) are first treated with a so-called band coating with a brush, and only after the primer has set is the entire area spray-coated (including already coated problematic places).
1. 1x paint PRAGOPRIMER STANDARD S2000, drying of the coat 24 hours. The optimal thickness of one layer is 25 -30 µm. Drying on metal objects can be accelerated by heat drying to 80 °C
2. filling as necessary, e.g., with BKP Rapid TOS polyester filler
3. sanding of filled areas with sandpaper No. 180 - 220 wet
4. 1x PRAGOPRIMER STANDARD S2000
5. sanding with sandpaper No. 280
6. 2 to 3x enamel INDUSTROL UNIVERZÁL S2013, INDUSTROL PLUS S2071, INDUSTROL PROFI U2129 or matte INDUSTROL UNIMAT S2075

Coating absorbent substrate:
1. 1x priming with S1023 LAZUROL CLASSIC glaze or S1033 LAZUROL IMPREGNANT BASE, drying 24 hours
2. 1x paint PRAGOPRIMER STANDARD S2000, drying 24 hours
3. 2 to 3x enamel INDUSTROL UNIVERZÁL S2013, INDUSTROL PLUS S2071, INDUSTROL PROFI U2129 or matte INDUSTROL UNIMAT S2075
If filling is necessary, proceed as in the previous point (coating of metal).

You may need covering materials, such as paper adhesive tape or covering foil, possibly sanding papers. Don't forget brushes and rollers.

Safety warnings of the product (H-phrases)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Attention! Dangerous respirable droplets may be formed when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapor/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor.
• P501: Dispose of contents/container in accordance with product instructions.