Pragoprimer Standard S2000 basic color for metal, 0100 white, 600 ml

Basic synthetic anti-corrosion paint

CHARACTERISTICS AND USE:

Pragoprimer Standard S2000 is a universal basic color for metal and absorbent substrates for indoor and outdoor environments, especially under synthetic and air-drying coatings, for painting for example metal constructions, machinery, metal and wooden furniture, etc. The paint has excellent anti-corrosive properties, very fast drying, and universal applicability.

Key features:

• active anti-corrosive pigment
• fast drying
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, rust, and dust, mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 technical benzene, BALTECH P6401 acetone, or where possible hot pressurized water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhered impurities must be removed manually or mechanically (sanding, scraping). Any rust can also be removed manually or mechanically (metal brushes, sanding discs) or using rust removers. If chemical rust removers are used, a subsequent rinse with clean water is required.
Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adherent coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 18 - 21 m²/l for one coat

WORKING PROCEDURE:

Before use, the contents should be thoroughly mixed and diluted if necessary. The paint is applied with a brush, roller, or by spraying to the previously prepared substrate.
Coating / spraying metal:
When spraying, the problematic areas (corners, edges, seams, surface defects) are first treated with a brush using a so-called strip coating and only after this coating has become tacky is the entire area sprayed (including previously painted problematic spots).
1. 1x paint PRAGOPRIMER STANDARD S2000, drying time 24 hours. The optimal thickness of one layer is 25 -30 µm. Drying on metal objects can be accelerated by forced drying at 80 °C
2. filling as needed, e.g., with polyester filler BKP Rapid TOS
3. sanding the filled areas with sandpaper No. 180 - 220 wet
4. 1x PRAGOPRIMER STANDARD S2000
5. sanding with sandpaper No. 280
6. 2 to 3x enamel INDUSTROL UNIVERSAL S2013, INDUSTROL PLUS S2071, INDUSTROL PROFI U2129 or matte INDUSTROL UNIMAT S2075

Coating absorbent substrate:
1. 1x impregnation with stain S1023 LAZUROL CLASSIC, or S1033 LAZUROL IMPREGNATING BASE, drying time 24 hours
2. 1x paint PRAGOPRIMER STANDARD S2000, drying time 24 hours
3. 2 to 3x enamel INDUSTROL UNIVERSAL S2013, INDUSTROL PLUS S2071, INDUSTROL PROFI U2129 or matte INDUSTROL UNIMAT S2075
If filling is necessary, proceed as in the previous point (coating metal).

You may find it useful to have covering material, such as paper adhesive tape or covering foil, or possibly sanding papers. Don’t forget about brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! When spraying, dangerous respiratory droplets may form.Do not inhale aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame, and other sources of ignition. No smoking.
• P261: Avoid breathing dust/mist/gas/mist/vapor/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P304+P340: IF INHALED: Move person to fresh air and keep at a position comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor.
• P501: Dispose of contents/container in accordance with the instructions on the product.