Tlumex Plast anti-corrosion paint for cars and chassis, black, 4 kg

Asphalt anti-corrosion and anti-abrasive coating for protecting the lower parts of car bodies. Excellent resistance to corrosive and abrasive effects of de-icing materials. Provides reliable anti-corrosion and anti-abrasive protection during both summer and winter periods. The dried coating is black, non-repaintable, permanently elastic, and has excellent adhesion to metal substrates.

For use on the lower parts of car bodies and chassis. All metal materials in the exterior requiring a high level of protection. Corroded surfaces must be mechanically cleaned and treated with a suitable chemical agent (e.g., Fest Primer) before coating. Cardboard roofing, mechanically unloaded concrete, wood, and other materials.

Surface preparation and application method:
Before use, TLUMEX® PLAST must be thoroughly mixed, and the coating should be applied to a dry substrate free from dust, grease, rust, and old non-adhering coatings. It can be applied with a brush, roller, or special spray gun at a minimum temperature of +10 C. For areas with rust residues, we recommend using Fest Primer as the first coat. TLUMEX® PLAST is applied in one to three layers as needed, always after proper drying of the previous layer.

Dilution:
The coating is supplied in a consistency suitable for application; if necessary, thinner S 6006 may be used to dilute. Diluting the product decreases the strength of the applied film and thus the protective effect of the coating.

Coverage: 3 – 4 m2 in one layer from 1 kg of paint

Product safety warnings (H-statements)

• H226: Flammable liquid and vapours.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell; phone 224 919 293 or 224 915 402 (24/7)
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with local regulations.