Detecha Izoban concrete paint, gray, 5 kg

Synthetic coating material for concrete. 100% waterproof, resistant to oils, salt solutions, weak acids and alkalis, short-term exposure to diesel fuel. Mechanically durable. Withstands permanent thermal stress up to +50 °C. Easily repairable by simple repainting. A product with an excellent quality-to-price ratio.

Use:
Outdoor and indoor coatings for concrete. Concrete floors (garages, non-residential spaces, basements, workshops, balconies, etc.). Concrete swimming pools, water tanks (SZÚ Prague certification), masonry, plasters. Steel tanks coated with a basic anti-corrosive primer (e.g., Fest Primer, Superkov, etc.)

Warning:
Walkable after 8 hours. Pool filling after 7 days. Final curing 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Yield:
The yield of the coating material depends on the quality of the painted surface and ranges from 6 - 8 m² per 1 kg in one layer at an average dry film thickness of 50 μm.

Substrate preparation:
Concrete must be absorbent, possibly roughened, not treated with anti-adhesion, well-cured, dry (maximum relative humidity of the substrate 15%), insulated against rising moisture. It must be cohesive (concrete cohesion in tension min. 1.5 MPa), free from all dirt and poorly adhering particles. If in doubt about the suitability for a given substrate (e.g., leveling compound, old coating), we recommend conducting a test coat on a smaller area.

Application method:
Before use, thoroughly mix the material and, if necessary, dilute. Before coating untreated concrete surfaces, we recommend applying a primer with diluted coating in a ratio of 1 part Izoban to 1 part thinner S 6005. For larger areas, we recommend using material from one production batch; if different batches are used, they should be mixed to ensure a uniform color shade. Applied with a brush or roller in at least two layers, depending on the absorbency of the substrate, always after the previous layer has dried. The total thickness of the entire coating system must be approximately 100 µm after drying. A thicker layer of paint significantly prolongs the drying and curing time, so it is necessary to proceed with thin layers. For coatings of steel tanks and barrels, we recommend pre-coating the surface with a basic anti-corrosive primer (Fest primer and Superkov) and subsequently applying Izoban only after the base has thoroughly cured for at least 48 hours. Work in a well-ventilated environment at temperatures between +10 and +25°C. Do not work in direct sunlight!

Warning:
The paint is not intended for applications that come into direct contact with food, animal feed, and drinking water, and for painting children's furniture and toys. It cannot be applied to poorly dried substrates, e.g., in damp, insufficiently ventilated spaces. The coating does not withstand the action of gasoline and organic solvents.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• H226: Flammable liquid and vapors.
• H312: Harmful to health on contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm breastfeeding infants through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spilled product.
• P501: Dispose of contents/container according to instructions on the product.