Detecha Izoban color for concrete, RAL 1001 beige, 5 kg

Synthetic coating for concrete. 100% waterproof, resistant to oils, salt solutions, weak acids and bases, short-term to motor diesel. Mechanically resistant. Tolerates permanent thermal load up to +50 °C. Easily repairable with simple re-coating. A product with an excellent price-to-quality ratio.

Usage:
Outdoor and indoor coatings for concrete. Concrete floors (garages, non-residential areas, cellars, workshops, balconies, etc.). Concrete swimming pools, water tanks (certified by SZÚ Prague), masonry, plasters. Steel tanks treated with a basic anti-corrosion coating (e.g. Fest Primer, Superkov, etc.)

Note:
Walkable after 8 hours. Filling the pool after 7 days. Final curing takes 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Coverage:
The coverage of the coating depends on the quality of the surface being painted and ranges from 6 - 8 m² per 1 kg in one layer with an average dry film thickness of 50 μm.

Substrate preparation:
Concrete must be absorbent, possibly roughened, not treated with a curing compound, well-cured, dry (maximum relative humidity of the substrate 15%), insulated against rising moisture. It must be cohesive (cohesion of concrete under tension min. 1.5 MPa), free of all contaminants and poorly adhering particles. If in doubt about the suitability for the given substrate (e.g. leveling compound, old coating), we recommend performing a test coat on a smaller area.

Application method:
Before use, the material must be thoroughly stirred and, if necessary, diluted. We recommend priming uncoated concrete surfaces with a diluted coating in the ratio of 1 part Izoban to 1 part thinner S 6005. For larger areas, we recommend using material from one production batch, or mixing different batches to ensure a consistent color shade. It is applied with a brush or roller in at least two layers depending on the absorbency of the substrate, always after the previous layer has dried. The thickness of the entire coating system must be approximately 100 µm after drying. A thicker layer of paint significantly prolongs the drying and curing time, so it is necessary to work in thin layers. In the case of coatings for steel tanks and barrels, we recommend pre-treating the surface with a basic anti-corrosion primer (Fest primer and Superkov) and applying the Izoban coat only after thorough hardening of the base for at least 48 hours. Work in a well-ventilated environment at temperatures between +10 and +25 °C. Do not work in direct sunlight!

Warning:
The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, and for coatings on children's furniture and toys. It cannot be applied to poorly dried substrates, e.g., in damp inadequately ventilated areas. The coating does not withstand the effects of gasoline and organic solvents.

Product safety warning (H-statements)

• EUH066: Repeated exposure may cause dry skin or cracking.
• H226: Flammable liquid and vapour.
• H312: Harmful in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm breast-fed children.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with the instructions on the product.