Detecha Superkov Satin 2v1 base and top coat for metal, semi-gloss, Ral 8017 chocolate brown, 5 kg

Detecha Superkov Satin 2v1 base and top coat for metal is a newly developed coating with a silky shiny appearance in an attractive modern color range. It is a base and top coat in one, which provides not only an attractive appearance but also perfect anti-corrosion protection. It reliably protects against all weather influences including UV radiation. It is highly flexible, managing significant temperature fluctuations. For long-term protection (up to 8 years), 2 coats of Superkov Satin are sufficient without a preliminary base coat.

Properties of the metal paint:

• Base and top alkyd-urethane coating
• High degree of anti-corrosion protection
• Highly flexible – can withstand significant temperature fluctuations
• Contains UV ray absorber that prevents degradation of the coating due to weather
• Long-lasting, modern appearance, easy application.

Dilution:
S 6005

Application of the metal paint:

Outdoor and indoor coatings of metals. Sheet metal roofing, gates, gutters, sills, frames, fences, steel structures, pipes, and other metal materials. We recommend allowing galvanized sheet metal to oxidize naturally. For corroded substrates, we recommend pre-treating with Fest Primer.

• Substrate: steel, cast iron, galvanized steel, titanium-zinc, aluminum, copper. We recommend painting fresh galvanized sheet metal after one year of exposure to weather influences.
• Environment: interior, exterior with higher corrosion stress (damp spaces, industrial areas)
• Examples: sheet metal roofing, gates, gutters, sills, frames, fences, steel structures, pipes, etc.

Coverage:
Theoretical coverage for one coat is 9 - 11 m² from 1 kg of coating at a typical dry film thickness of 40 - 50 µm (corresponding wet thickness is 75 - 95 µm). Actual coverage depends on the quality of the substrate and the application method. Maximum durability can be achieved with proper application and dry coating thickness of 100 - 150 µm.

Preparation of the substrate and application method:
The surfaces to be painted must be dry, degreased, free from dirt, rust, and old non-adhering coatings. We recommend cleaning with a high-pressure water jet with a rotary nozzle. Before use, the contents of the can must be thoroughly stirred and possibly diluted (5-10% thinner) to the desired consistency. To ensure compatibility of the new coating with any old coating, it is advisable to perform a test coat on a small area. The coating is applied with a brush, roller, or spraying in 2 - 3 layers at a temperature of +5 to +25 C. The interval between individual coats is at least 18 hours at a temperature of 20 °C. For spray application, a wet-on-wet method can also be used after partial flashing off solvents from the previous coat (i.e., about 30 minutes later). The coating becomes touch dry in up to 6 hours and fully cures in 48 hours. Lower temperatures or increased humidity may prolong the drying time. Do not work in direct blazing sun! When painting larger continuous areas, we recommend using products from the same production batch or mixing the contents of individual packages in a larger container to color-homogenize. Surfaces difficult to clean from corrosion deposits should be pre-treated with the anchoring polyurethane product Fest Primer. This will increase the quality and lifespan of the entire coating system.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container according to the instructions on the product.