Karbolineum Extra 3v1 wood stain, amber, 700 g

A modern impregnating coating with decorative properties serves as a highly effective deep-penetrating saturator and at the same time as a top protective coating offered in ten color shades. The very fine transparent pigments contained give the wood the desired shade while highlighting its natural structure. Along with other functional substances, it reliably protects against all weather influences, including UV radiation. The coating does not seal the wood, allowing it to regulate moisture, and it neither flakes nor cracks. Once fully dried, it is completely odorless. The coating film contains biocidal components that protect the surface from attack by moss, mold, algae, and fungi. The clear shade itself does not provide sufficient UV protection outdoors. It is therefore used as an impregnating saturator under colored coatings or as an additional coating that protects previous layers and extends their lifespan.

Restoration occurs after 3 – 6 years depending on the surrounding conditions by simply repainting, without the need to remove the old paint. Karbolineum Extra is a product with a long-standing tradition. Due to its specific properties, it represents the most commonly used preparation for the treatment of log cabins, wooden facades, shingle roofs, historical buildings, and monuments of folk architecture. Karbolineum Extra is a product subject to regular certification supervision. It has obtained Construction Technical Certificate No. STO-AO 224-500/2012/a. Its protective effects and properties are systematically verified by the Institute for Testing and Certification, a.s., Zlín (Authorized Person No. 224).

Use:
Construction wooden structures in exteriors and interiors, wooden facades, shingle roofs, cottages, chalets, cladding, pergolas, gazebos, carports, fences, windows, shutters, and others.

Substrate preparation and application method:
Before use, thoroughly mix the preparation, or shake it. The wood to be coated must be dry (rel. humidity max. 15%), free from old coatings and other mechanical and vegetative contaminants, including resin exudates. It is applied with a brush, roller, spray gun, or by dipping in one or more layers. An application of another layer should only be done after the previous one has been absorbed. The layer should completely penetrate the wood before drying, to avoid the formation of shiny spots. Drying time - usually up to 24 hours - depends on temperature, airflow, humidity, and absorbency of the substrate. On smoothly processed and slightly absorbent wood, this time may be longer. The resulting shade may vary depending on the type of wood being painted. It is recommended to perform a test application on a smaller area.

Dilution:
Not diluted. Thinner S6005 or S 6006 for cleaning tools.

Yield:
It is recommended to apply at least 150 g/m2 (6.7m2 from 1 kg) to ensure sufficient protective efficacy.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P262: Avoid contact with eyes, skin, or clothing.
• P264: Wash all affected parts of the body thoroughly after handling, such as hands
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor
• P331: DO NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.