Hostagrund Prim 3v1 S2177 base and top coat for metal, 0131 gray, 2.5 l

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive semi-matte paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matte paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously a top coat. It is intended for direct application on metals in outdoor and indoor environments. The metal paint is ideal for coatings of steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The metal paint can also be used for porous substrates such as wood and particleboard. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, which prevents dirt, airborne deposits, and water from sticking to and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating has a long lifespan, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer an individual shade, its tinting base is available for the possibility of realizing an additional 5 thousand shades.

Key properties:

• long-term resistance to weather impacts
• barrier anti-corrosive protection
• contains teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 TECHNICAL GASOLINE, BALTECH P6401 ACETONE, or where possible, warm pressurized water containing detergent). If there are any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25%), and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, for example with a synthetic wool cloth on a handle, until a metallic gray foam is formed. Then rinse thoroughly with clean water. The paint is applied after the sheet has completely dried. Porous substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the prepared substrate. Before use, the paint is thinned with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without claiming an aesthetic appearance. These shades are primarily intended for spray application.

You may need covering materials, such as paper masking tape or covering film, or possibly sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be created when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flame, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.