Hostagrund Prim 3v1 S2177 base and top coat for metal, 0240 medium brown, 2.5 l

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive semi-matte paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matte paint combining the properties of a base anti-corrosive coat, intermediate layer, and simultaneously top coat. It is designed for direct application on metals in outdoor and indoor environments. The metal paint is ideal for coatings on steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, poles, fences, columns, gates, and more. The metal paint can also be used for absorbent substrates such as wood and chipboard. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, which prevents dirt, atmospheric deposits, and water from adhering and affecting the painted surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer a custom shade, a tinting base is available for creating an additional 5,000 shades.

Key properties:

• long-term resistance to weathering
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust, and dust, mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE, or where possible, warm pressurized water with detergent). To remove any residues of various salts, the surface must be rinsed with clean water afterwards. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25%) and approximately 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after approximately 10 minutes of acting, it is spread with a pad made of synthetic fleece on a handle until a metallic gray foam is created. Followed by thorough rinsing with clean water. The paint is applied after the sheet is completely dry. Absorbent substrates must first be soaked with a suitable impregnant, which ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l for one layer

WORK PROCEDURE:

The paint is applied to the previously prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner if necessary and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without ensuring an aesthetic appearance. These shades are primarily intended for spray application.

You might need covering material, such as paper adhesive tape or covering foil, or sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! When spraying, dangerous respirable droplets may be formed. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easily removable. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.