Hostagrund Prim 3v1 S2177 base and top coat for metal, 0155 anthracite, 600 ml

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive satin paint for metal.

CHARACTERISTICS AND USE:

Single-layer satin paint combining the properties of an anti-corrosive primer, intermediary coat, and simultaneously top coat. It is designed for direct application on metals in outdoor and indoor environments. The paint for metal is ideal for painting steel materials, oxidized and freshly galvanized surfaces such as roofs, metal constructions, masts, fences, poles, gates, etc. Paint for metal can also be used on absorbent substrates like wood and particle board. The Teflon contained in the paint creates a non-wettable layer on the surface of the coating, which prevents dirt, airborne debris, and water from adhering and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating demonstrates long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer a custom shade, a tinting base is available to achieve an additional 5,000 shades.

Key properties:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. Initially, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 TECHNICAL BENZENE, BALTECH P6401 ACETONE, or where possible, warm high-pressure water containing detergent). To remove any residual salts, the surface must then be rinsed with clean water. Coarse and well-adhered dirt must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (with metal brushes, abrasive discs).
Surface preparation of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25% solution), and approximately 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action, it is spread using a synthetic fleece cloth on a holder until a metallic gray foam is formed. A thorough rinse with clean water follows. The paint is applied after the sheet has completely dried. Absorbent substrates must first be primed with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and free from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied on a pre-prepared substrate. Before use, the paint is thinned with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can only be applied with a brush and roller without any claim on aesthetic appearance. These shades are mainly intended for spray application.

You may find it handy to use covering materials, such as paper adhesive tape or covering foil, or abrasive papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when sprayed. Do not breathe aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.