Sokrates Lazurit Plus medium-layer wood stain, colorless, 0.7 kg

Medium-layer alkyd stain for wooden surfaces for outdoor and indoor environments based on hybrid alkyd. The coating is perfectly resistant to fungal attack and similar. It penetrates the wooden substrate, strengthens the surface, and blocks water penetration. Standardly contains UV filter. It is primarily intended for the coating of fences, building cladding, along with Lazurit FORTE log cabins, pergolas, garden furniture, windows, and doors in cottages, interior paneling, ceilings, and similar. It has a long lifespan, a pleasant waxy velvety surface, resistance to peeling, and excellent lightfastness. The coating material is not intended for direct contact with food, feed, and drinking water!

Characteristics of Sokrates Lazurit Plus wood stain:

• Pleasant velvety surface,
• penetrates the wooden substrate, strengthens the surface,
• strongly repels water,
• protects the wooden coating film,
• contains a UV filter and stabilizer for the coating material,
• complies with ČSN EN 71-3, toys and products for children,
• the surface resists fungal attacks. Prevents further penetration into the wooden substrate.

Coverage:

one coat 10 - 12 m²/1 kg.

Thinner:

Water.

Cleaning tools:

With water, dried paint can be removed with organic solvents

Usage:

Sokrates Lazurit Plus medium-layer wood stain is intended for top coats for outdoor wooden cladding of buildings, entrance doors, as well as windows of cottages, including pergolas, garden furniture, fences, railings, etc. In interiors, it is used for coating ceilings, wall paneling, beams in attics, as well as furniture that is not heavily subject to abrasion, infill of railings, and similar. Suitable for toys for children. Always roughen the surface for outdoor use with sandpaper No. 60-80. A smooth wooden surface is unsuitable. Sokrates Lazurit Plus medium-layer wood stain is not permanently walkable, meaning – permanent operation. Lazurit Plus can be used for hobby purposes as an impregnator under top coats. When used this way, Lazurit Plus is diluted with water in the ratio of 2:1 to 1:1.

Application:

Sokrates Lazurit Plus medium-layer wood stain is applied with a brush, spraying, or roller at a minimum temperature of the coating material, air, and substrate + 10 °C. Recommended application temperature: + 18 °C to + 23 °C.