Lazurol Aqua P UREX V1301 satin resistant wood varnish transparent, 600 g

Acrylic-urethane water-based varnish for interior wood. The varnish is intended for creating a high-quality and durable surface on all types of wooden floors made of hardwood and softwood in interiors. It can also be used for coating plywood, furniture parts, wooden panels, cork, etc. or as a top coat on dispersion paints.

It meets the slip resistance requirements for dry and wet conditions (ČSN 744507) for floors in all residential and occupancy areas, as well as for parts of buildings used by the public – the medium values of the coefficient of friction for the entire set must be at least 0.5. It complies with the conditions of ČSN EN 71-3, part 3: toy safety. Migration of certain elements.

Properties of Lazurol Aqua P UREX V1301 resistant wood varnish:

• Coverage 8 - 12 m² / kg in one layer.
• Application layer: top transparent varnish.
• Application method: brush, roller, spraying (including AIRLESS).
• Area of wood (varnishes and glazes): wooden floors, wooden stairs, parquet, cork, furniture - varnished, doors - varnished.
• Environment: exterior/interior: interior - indoor environment.

Working procedure:

Before use, thoroughly stir the varnish. The ambient temperature during application should be between +15 °C and +25 °C. It is applied with a brush, roller, or by spraying. The wood surface to be varnished must be free of all dirt, dust, and old non-adherent coatings. Resinous areas must be cleaned with solvent and the surface carefully sanded with progressively finer sandpaper P80-100-120-150 (grit adjusted to the condition, type, and quality of the substrate). After removing contaminants from sanding, one layer of varnish diluted by a maximum of 10% water is applied. After 2 hours of drying, lightly sand the surface with sandpaper P220-400. After again removing contaminants from sanding, two coats of undiluted varnish are applied with a time interval of 2-8 hours. If the time interval between individual coats is more than 8 hours, light sanding with sandpaper P220-400 is recommended.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H317: May cause an allergic skin reaction.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P501: Dispose of contents/container according to product instructions.