Lazurol S1002 mat, varnish for metal and wood, colorless, 750 ml

Synthetic wood varnish enhancing the grain of wood. Universal varnish with a matte finish. It creates a durable, decorative protective layer resistant to abrasion, protecting wood from damage.

CHARACTERISTICS AND USE:

The universal matte varnish has excellent mechanical properties and high yield. The product is intended for top transparent coatings of wood and metal in interior and exterior, for example: varnishing wooden wall and ceiling paneling, medium density fiberboard, metal fittings, wooden and metal railings.

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%. Wood with a high resin content (larch, pine) should be treated with BALTECH C6000 thinner to remove all resin exudations. The quality of wood priming affects the final appearance of the coating and its lifespan. First, soak the wood surface with an appropriate primer that ensures uniform absorbency of the substrate and greater protection of the wood (when using a fungicidal primer, it also protects against mold, fungus, and insect infestation). Then sand the wood surface with fine sandpaper, and then apply the varnish. The metal substrate must be clean, dry, free of grease, rust, dust, and mechanically cleaned.

DILUTION: Thinner BALTECH S6006

Theoretical yield: 14 to 17 m2/1 liter for one coat.

APPLICATION PROCEDURE:

Before use, thoroughly mix the varnish and dilute if necessary! Especially for shade 0001-matte, it is essential to mix the matting additive thoroughly throughout the entire volume. The varnish is applied to the prepared substrate.

Metal coating:

•  2-3x synthetic varnish LAZUROL UNIVERSAL VARNISH S1002 at 24-hour intervals.

Wood coating:

• 1x synthetic impregnation glaze LAZUROL CLASSIC S1023 or LAZUROL IMPREGNATING BASE S1033.
• 1-2x synthetic varnish LAZUROL UNIVERSAL VARNISH S1002. The second and subsequent coatings can be applied after 24 hours. The optimal thickness of one layer of coating is 25 - 30 µm.

Warning:

During application and throughout the drying time, the ambient and substrate temperature must be at least +10 °C and at most +40 °C. The optimal temperature for applying the coating is +18 °C to +23 °C, and the relative humidity of the air is 40 to 70%. Lower temperatures and higher relative humidity during application and drying, along with too thick a layer of the applied film, significantly slow down the drying and hardening of the coating film. It is not recommended to apply varnish during a hot summer day. High ambient temperatures cause rapid drying of the surface layer of the coating film, potentially leading to wrinkling of the film. Problems can also arise in connecting individual strokes of the applied varnish. The type, surface, and any previous coating of the wood affect the final shade of the coating. Natural wood changes color due to light, regardless of the varnish. This product is not suitable for coatings on floors and wood in permanently damp environments (e.g., saunas), wood treated with oils or waxes, or products containing waxes. Stacking and touching up coated areas must be tested under specific conditions (climatic conditions, layer thickness, number of coatings, shape of the substrate, type of substrate, etc.).

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/protective goggles/face shield.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P501: Dispose of contents/container in accordance with product instructions.