Lazurol Aqua P UREX V1301 matt resistant wood varnish transparent, 600 g

Acrylic-urethane water-based wood varnish for interiors. The varnish is intended for creating a high-quality and durable surface on all types of hardwood and softwood floors in interiors. It can also be used for coating plywood, furniture parts, wooden paneling, cork, etc., or as a top coat over dispersion paints.

It meets the requirements for slip resistance in dry and wet conditions (ČSN 744507) for floors in all living and recreation rooms and also for parts of buildings used by the public – the median static friction coefficient for the entire set must be at least 0.5. It meets the conditions of ČSN EN 71-3, part 3: toy safety. Migration of certain elements.

Properties of Lazurol Aqua P UREX V1301 resistant wood varnish:

• Yield 8 - 12 m² / kg in one coat.
• Application layer top transparent varnish.
• Application method brush, roller, spray application (including AIRLESS).
• Area wood (varnishes glazes): wooden floors, wooden stairs, parquet, cork, furniture - varnished, doors - varnished.
• Environment exterior/interior: interior - indoor environment.

Working procedure:

Before use, thoroughly mix the varnish. The application temperature must be between +15 °C and +25 °C. It is applied with a brush, roller, or by spraying. The surface of the wood to be varnished must be free of all dirt, dust, and old loose coatings. Resin spots must be cleaned with solvent and the surface carefully sanded with graduated sandpaper P80-100-120-150 (grain sizes adjusted to the condition, type, and quality of the substrate). After removing the dirt from sanding, one coat of varnish diluted with a maximum of 10% water is applied. After 2 hours of drying, the surface is lightly sanded with sandpaper P220-400. After again removing the dirt created during sanding, two coats of undiluted varnish are applied with a time interval of 2-8 hours. If the time interval between successive coats exceeds 8 hours, light sanding with sandpaper P220-400 is recommended.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H317: May cause an allergic skin reaction.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.