Lazurol Topdecor S1035 thin-film stain for wood T025 cherry, 4.5 l

Lazurol Topdecor S1035 thin-film stain for wood is intended for protective staining coatings for soft and hardwood, exposed to weather influences, as well as for coatings in interiors (garden furniture, wooden gables, ceilings, wall and ceiling cladding, fences, cottages and wooden cabins, windows, doors, cork, penetration of wooden floors). The wood stain contains wax, natural oil, and transparent iron oxides. It penetrates deeply into the wood structure and emphasizes its texture. It provides long-term protection for wood against water and UV radiation. The coatings are colorfast, easily renewable, and do not crack. Shade T000 - natural is intended for interior use only!!

Examples of use: garden furniture, wooden gables, ceilings, wall and ceiling cladding, fences, cottages and wooden cabins, windows, doors, cork, penetration of wooden floors.

Properties of Lazurol wood stain:

• thin-film stain for wood
• contains natural oils and waxes
• water-repellent
• penetrates deeply into the wood structure
• highlights the natural grain
• easily renewable coating

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free of resin residues before application. Wood with a high resin content (larch, pine) must be free of all resin exudation beforehand, for example, by washing with BALTECH C6000 thinner. The quality of wood pre-treatment depends on the overall appearance of the final wood finish and also the overall lifespan of the coating system.

The surface of the wood intended for outdoor use must first be impregnated with a suitable fungicidal primer that provides protection against mold, fungi, and insects, e.g., with LAZUROL IMPREGNATING BASE S1033. The surface of the wood intended for indoor use should first be treated with a clear stain LAZUROL CLASSIC S1023 or natural shade LAZUROL TOPDECOR S1035. The penetration with a clear primer ensures uniform absorbency of the substrate before further application of the coatings. Subsequently, the wood surface must be sanded with fine sandpaper and only then apply the impregnating stain. When renewing coatings, the wood must be free of old non-adherent layers, for example by sanding.

DILUTION: thinner BALTECH S6006 (especially for cleaning tools)

Theoretical coverage: 13-15 m²/l for one layer depending on the absorbency of the substrate

WORKING PROCEDURE:

Apply with a brush after thorough stirring on the pre-prepared substrate. The stain does not need to be diluted, it is already at the application viscosity. During the work, it is necessary to regularly mix the staining lacquer. For indoor use, it is applied in 1 to 2 layers, for outdoor coatings three layers are recommended, but only in colored shades. The clear stain is intended for indoor coatings. Individual coats can be applied at intervals of 24 hours. For uniform highlighting of the wood grain, it is advisable to wipe off any excess lacquer after 10 to 15 minutes of application using a dry brush or cloth.

For continuous areas, always use material from the same production batch. Using the same production batch ensures the same color shade. The type, surface, and previous coating of the wood influence the final color shade, so we recommend performing a test coat before the final application. Complaints about color shades will only be recognized if made about the test area.

For a high gloss finish, it is possible to coat the dried surface treated with LAZUROL TOPDECOR S1035 with LAZUROL UNIVERSAL VARNISH S1002 or the natural shade of the stain LAZUROL GOLD S1037. Floors can be coated with LAZUROL OUTDOOR WALKING VARNISH S1020.

Warning: Absorbent materials (rags, sawdust, papers, dust, etc.) soaked with the stain must be disposed of safely, as they may self-ignite under certain circumstances.

Toning: Color shades can also be prepared in the TELURMIX tinting system.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P270: Do not eat, drink or smoke when using this product.
• P280: Wear protective gloves/clothing/eye protection/face shield.
• P302+P352: ON SKIN CONTACT: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Seek medical advice/treatment.
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container in accordance with product instructions.