EPOLEX TOP COAT S2321 epoxy two-component paint for wood, metal, masonry, 1000 white, 700 g + hardener 240 g

Top two-component epoxy paint designed for high-gloss coatings of various surfaces.

CHARACTERISTICS AND USE:

The paint is intended for high-gloss coatings of wood, metals, masonry, certain plastics, etc. The cured coating resists moisture, various chemicals (especially alkalis), oils, fuels, and a range of solvents. It withstands temperatures up to 120 °C. Due to weathering effects, the coating tends to chalk and lose gloss. The coating can be sanded and polished with paste or polish. Examples of suitable applications include coatings for structures and walls in dairies, sugar factories, breweries, etc., metal tanks, pipes, machines, washable wall coatings, coatings for concrete floors, operational structures.
The paint has been approved for coatings on surfaces of food processing equipment that come into contact with food.
Before use, the paint should be mixed and combined with the hardener in the prescribed ratio.

Key properties:

• chemically and mechanically resistant coating
• high-gloss finish
• suitable for contact with food

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free from resin residues before application. The concrete or masonry substrate must be dry, cohesive, cleaned, well-cured (usually 4 – 6 months), and structurally insulated against ground (bottom) moisture. The metal substrate must be clean, dry, free from grease, rust, and dust, and mechanically cleaned. Absorbent substrates must be additionally impregnated with a suitable primer, and possibly coated with an appropriate base material. Metallic substrates must be treated with a suitable base anti-corrosive material. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6300

HARDENING: EPOLEX HARDENER S7300
Weight ratio of hardening: EPOLEX TOP COAT S2321 - 100 weight parts : EPOLEX HARDENER S7300 - 33 weight parts.
Volume ratio of hardening: EPOLEX TOP COAT S2321 - 70 volume parts : EPOLEX HARDENER S7300 - 30 volume parts.

Theoretical coverage: 11 - 15 m²/kg of cured mixture per layer

WORKING PROCEDURE:

Before use, the content should be hardened according to the prescribed ratio, thoroughly mixed, and diluted if necessary. It is applied with a brush, roller, or spraying onto a pre-prepared substrate.
Coating / spraying metal:
1. 1x coating with EPOLEX PRIMER S2300. Drying and curing of the coating can be accelerated by drying at a temperature of 60 to 100 °C for 60 to 30 minutes.
2. 1 to 2x coating with EPOLEX TOP COAT S2321. The second coat can be applied no sooner than after 24 hours. Drying can be accelerated by drying at a temperature of 60 to 100 °C for 60 to 30 minutes.

Product safety warnings (H-statements)

• EUH205: Contains epoxy components. May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P501: Dispose of contents/container in accordance with product instructions.